* [U-Boot] SATA Port Multiplier and AHCI Support
@ 2014-02-15 2:30 Aaron Williams
0 siblings, 0 replies; only message in thread
From: Aaron Williams @ 2014-02-15 2:30 UTC (permalink / raw)
To: u-boot
Hi all,
I am wondering if anyone has tried to deal with SATA port multipliers
inside U-Boot? I am in the process of merging a lot of libata and port
multiplier support from the Linux kernel back into U-Boot since one of
our chips is targeted at NAS devices and our boards use SATA port
multipliers.
This has ended up being a fairly large project. In addition I am needing
to make a lot of changes to the AHCI driver. The first thing I did was
switch it from being SCSI to SATA but there are a significant number of
additional changes required as well since the 1:1 mapping of port to
drives no longer applies.
-Aaron
--
Aaron Williams
Software Engineer
Cavium, Inc.
(408) 943-7198 (510) 789-8988 (cell)
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2014-02-15 2:30 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-02-15 2:30 [U-Boot] SATA Port Multiplier and AHCI Support Aaron Williams
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox