[U-Boot] [PATCH 2/2] spi: ti_qspi: Fix baudrate divider calculation

[Vignesh R <vigneshr@ti.com>]

Hi,

On Thursday 13 October 2016 05:41 PM, Jagan Teki wrote:
> On Wed, Oct 12, 2016 at 9:46 AM, Vignesh R <vigneshr@ti.com> wrote:
>> Fix the divider calculation logic to choose a value so that the
>> resulting baudrate is either equal to or closest possible baudrate less
>> than the requested value.
>>
>> Signed-off-by: Vignesh R <vigneshr@ti.com>
>> ---
>>  drivers/spi/ti_qspi.c | 3 ++-
>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c
>> index 52520dff6325..d97e2479d1b3 100644
>> --- a/drivers/spi/ti_qspi.c
>> +++ b/drivers/spi/ti_qspi.c
>> @@ -16,6 +16,7 @@
>>  #include <asm/omap_gpio.h>
>>  #include <asm/omap_common.h>
>>  #include <asm/ti-common/ti-edma3.h>
>> +#include <linux/kernel.h>
>>
>>  DECLARE_GLOBAL_DATA_PTR;
>>
>> @@ -118,7 +119,7 @@ static void ti_spi_set_speed(struct ti_qspi_priv *priv, uint hz)
>>         if (!hz)
>>                 clk_div = 0;
>>         else
>> -               clk_div = (priv->fclk / hz) - 1;
>> +               clk_div = DIV_ROUND_UP(priv->fclk, hz) - 1;
> 
> Better to have a checks for min and max divider values or mask.

That code already exists in this function.


-- 
Regards
Vignesh