From: Stephen Warren <swarren@wwwdotorg.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work.
Date: Wed, 19 Feb 2014 12:29:19 -0700 [thread overview]
Message-ID: <5305060F.1060809@wwwdotorg.org> (raw)
In-Reply-To: <53050507.1020704@ti.com>
On 02/19/2014 12:24 PM, Dan Murphy wrote:
...
> Do we have a directory where default scripts exist for each board? Or at least samples for each board?
>
> I could not find them. If they don't exist then we should probably put them in the board dirs and cp them to the respective out directory
>
> Maybe this would be something that helps defined the known good config that the community can base their changes on.
For Tegra, I have created:
https://github.com/NVIDIA/tegra-uboot-scripts
I imagine those scripts would work on most boards that use the U-Boot
config in this patch series. I've certainly used almost identical
scripts on the Raspberry Pi.
I should perhaps put an example extlinux.conf into that repo too.
I imagine (well, it's pretty much the whole point) that distro
installers (e.g. Anaconda) will soon (or already do) support spitting
out extlinux.conf that'll work on ARM U-Boot too.
next prev parent reply other threads:[~2014-02-19 19:29 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-17 17:56 [U-Boot] RFC unified boot environment Dennis Gilmore
2014-02-17 17:56 ` [U-Boot] [RFC PATCH 1/3] add file with a default boot environment based heavily on Stephen Warrens recent tegra work Dennis Gilmore
2014-02-19 13:42 ` Tom Rini
2014-02-19 13:57 ` Dennis Gilmore
2014-02-19 15:54 ` Marek Vasut
2014-02-19 17:28 ` Stephen Warren
2014-02-19 17:30 ` Marek Vasut
2014-02-19 17:41 ` Stephen Warren
2014-02-19 17:44 ` Marek Vasut
2014-02-19 17:40 ` Stephen Warren
2014-02-22 8:20 ` Dennis Gilmore
2014-02-24 18:40 ` Stephen Warren
2014-02-24 20:07 ` Tom Rini
2014-02-19 18:44 ` Dan Murphy
2014-02-19 18:48 ` Stephen Warren
2014-02-19 18:52 ` Dan Murphy
2014-02-19 18:57 ` Stephen Warren
2014-02-19 18:59 ` Dan Murphy
2014-02-19 19:04 ` Stephen Warren
2014-02-19 19:10 ` Tom Rini
2014-02-19 19:16 ` Stephen Warren
2014-02-19 19:36 ` Tom Rini
2014-02-19 19:43 ` Stephen Warren
2014-02-19 19:57 ` Tom Rini
2014-02-19 20:10 ` Dennis Gilmore
2014-02-19 19:32 ` Dan Murphy
2014-02-19 19:38 ` Stephen Warren
2014-02-19 20:03 ` Dan Murphy
2014-02-19 19:02 ` Eric Nelson
2014-02-19 19:05 ` Dan Murphy
2014-02-19 19:16 ` Tom Rini
2014-02-19 19:24 ` Dan Murphy
2014-02-19 19:29 ` Stephen Warren [this message]
2014-02-19 19:37 ` Dan Murphy
2014-02-19 19:43 ` Tom Rini
2014-02-19 19:41 ` Tom Rini
2014-02-19 21:20 ` Denys Dmytriyenko
2014-02-20 12:31 ` Otavio Salvador
2014-02-20 13:46 ` Tom Rini
2014-02-22 12:56 ` Otavio Salvador
2014-02-17 17:56 ` [U-Boot] [RFC PATCH 2/3] move the beaglebones over to the generic configs Dennis Gilmore
2014-02-19 13:52 ` Tom Rini
2014-02-19 17:46 ` Stephen Warren
2014-02-19 19:57 ` Dan Murphy
2014-02-19 19:58 ` Dan Murphy
2014-02-19 20:05 ` Stephen Warren
2014-02-19 20:20 ` Dan Murphy
2014-02-19 20:22 ` Stephen Warren
2014-02-19 20:31 ` Dan Murphy
2014-02-19 20:38 ` Stephen Warren
2014-02-19 20:58 ` Dan Murphy
2014-02-19 21:07 ` Dennis Gilmore
2014-02-17 17:56 ` [U-Boot] [RFC PATCH 3/3] move wandboard over to use the generic distro configuratin and environment Dennis Gilmore
2014-02-19 11:52 ` Otavio Salvador
2014-02-19 17:50 ` Stephen Warren
2014-02-18 10:18 ` [U-Boot] RFC unified boot environment Stefano Babic
2014-02-18 16:09 ` Dennis Gilmore
2014-02-19 13:33 ` Tom Rini
2014-03-20 22:12 ` [U-Boot] [PATCH 0/6] " Dennis Gilmore
2014-03-20 22:12 ` [U-Boot] [PATCH 1/6] add README.distro file Dennis Gilmore
2014-03-21 18:48 ` Tom Rini
2014-03-25 20:40 ` Stephen Warren
2014-03-25 20:24 ` Stephen Warren
2014-03-28 15:42 ` Tom Rini
2014-03-28 16:11 ` Stephen Warren
2014-03-28 16:25 ` Tom Rini
2014-03-20 22:12 ` [U-Boot] [PATCH 2/6] add header with a generic set of boot commands defined Dennis Gilmore
2014-03-21 18:37 ` Marek Vasut
2014-03-21 18:53 ` Tom Rini
2014-03-21 21:00 ` Marek Vasut
2014-03-21 18:48 ` Tom Rini
2014-03-25 20:38 ` Stephen Warren
2014-03-25 20:36 ` Stephen Warren
2014-03-20 22:12 ` [U-Boot] [PATCH 3/6] move wandboard over to use the generic distro configuation and environment Dennis Gilmore
2014-03-20 22:12 ` [U-Boot] [PATCH 4/6] move beagleboard " Dennis Gilmore
2014-03-21 18:48 ` Tom Rini
2014-03-20 22:13 ` [U-Boot] [PATCH 5/6] move pandaboard " Dennis Gilmore
2014-03-21 18:49 ` Tom Rini
2014-03-20 22:13 ` [U-Boot] [PATCH 6/6] pxe: additionaly check for fdt_file env variable Dennis Gilmore
2014-03-21 18:49 ` Tom Rini
2014-03-25 20:45 ` Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5305060F.1060809@wwwdotorg.org \
--to=swarren@wwwdotorg.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox