From: Markus Niebel <list-09_u-boot@tqsc.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] net: fec_mxc: fix mii_speed configuration for MX6's
Date: Thu, 20 Feb 2014 08:40:03 +0100 [thread overview]
Message-ID: <5305B153.5050604@tqsc.de> (raw)
In-Reply-To: <1392820069-7202-1-git-send-email-phdm@macqel.be>
Hello Phillip,
Am 19.02.2014 15:27, wrote Philippe De Muyter:
> On MX6DL at least, measured mdc speed was wrong (3.3 Mhz instead of 2.5
> Mhz), because of wrong assumptions about the reference clock and the
> way the divider is used.
>
> I have fixed that for all MX6's by using the IPG clock as the reference
> clock, and applying the - 1 correction when we have a ENET MAC instead
> of a FEC MAC, just like what is done in the fec linux driver.
this should be fixed with
ARM: imx6: fix wrong fec clk
NET: fec_mxc: fix MDIO clock prescaler calculation
and was pulled yesterday to
u-boot-arm/master
>
> Signed-off-by: Philippe De Muyter <phdm@macqel.be>
> ---
> drivers/net/fec_mxc.c | 20 +++++++++++++++++---
> 1 files changed, 17 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
> index 3b2b995..3ab0ecd 100644
> --- a/drivers/net/fec_mxc.c
> +++ b/drivers/net/fec_mxc.c
> @@ -124,13 +124,27 @@ static int fec_mdio_read(struct ethernet_regs *eth, uint8_t phyAddr,
>
> static void fec_mii_setspeed(struct ethernet_regs *eth)
> {
> + u32 sysclock;
> + u32 mii_speed;
> +
> /*
> * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
> * and do not drop the Preamble.
> + * shift the result by 1, because MII_SPEED field is at bits 6..1.
> */
> - writel((((imx_get_fecclk() / 1000000) + 2) / 5) << 1,
> - ð->mii_speed);
> - debug("%s: mii_speed %08x\n", __func__, readl(ð->mii_speed));
> +#if defined(CONFIG_MX6)
> + sysclock = mxc_get_clock(MXC_IPG_CLK);
> +#else
> + sysclock = imx_get_fecclk();
> +#endif
> +#define MIIM_SPEED 2500000
> + mii_speed = DIV_ROUND_UP(sysclock, (MIIM_SPEED * 2));
> +#ifdef FEC_QUIRK_ENET_MAC
> + mii_speed -= 1;
> +#endif
> + writel(mii_speed << 1, ð->mii_speed);
> + debug("%s: sysclock %u, mii_speed %08x\n", __func__, sysclock,
> + readl(ð->mii_speed));
> }
>
> static int fec_mdio_write(struct ethernet_regs *eth, uint8_t phyAddr,
>
next prev parent reply other threads:[~2014-02-20 7:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-19 14:27 [U-Boot] [PATCH] net: fec_mxc: fix mii_speed configuration for MX6's Philippe De Muyter
2014-02-19 19:19 ` Troy Kisky
2014-02-19 20:37 ` Philippe De Muyter
2014-02-19 20:58 ` [U-Boot] [PATCH v2] " Philippe De Muyter
2014-02-20 7:40 ` Markus Niebel [this message]
2014-02-20 8:44 ` [U-Boot] [PATCH] " Philippe De Muyter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5305B153.5050604@tqsc.de \
--to=list-09_u-boot@tqsc.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox