[U-Boot] [PATCH v3] powerpc/t2081qds: Add T2081 QDS board support

[York Sun <yorksun@freescale.com>]

On 02/20/2014 09:16 PM, Shengzhou Liu wrote:
> T2081 QDS is a high-performance computing evaluation, development and
> test platform supporting the T2081 QorIQ Power Architecture processor.
> 
> T2081QDS board Overview
> -----------------------
> - T2081 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz
> - 2MB shared L2 and 512KB L3 CoreNet platform cache (CPC)
> - CoreNet fabric supporting coherent and noncoherent transactions with
>   prioritization and bandwidth allocation
> - 32-/64-bit DDR3/DDR3LP SDRAM memory controller with ECC and interleaving
> - Ethernet interfaces:
>   - Two on-board 10M/100M/1G bps RGMII ports
>   - Two 10Gbps XFI with on-board SFP+ cage
>   - 1Gbps/2.5Gbps SGMII Riser card
>   - 10Gbps XAUI Riser card
> - Accelerator:
>   - DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC
> - SerDes:
>   - 8 lanes up to 10.3125GHz
>   - Supports SGMII, HiGig, XFI, XAUI and Aurora debug,
> - IFC:
>   - 512MB NOR Flash, 2GB NAND Flash, PromJet debug port and Qixis FPGA
> - eSPI:
>   - Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040)
> - USB:
>   - Two USB2.0 ports with internal PHY (one Type-A + one micro Type mini-AB)
> - PCIe:
>   - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV)
> - eSDHC:
>   - Supports various SD/SDHC/SDXC/eMMC devices with adapter cards and
>     voltage translators
> - I2C:
>   - Four I2C controllers.
> - UART:
>   - Dual 4-pins UART serial ports
> 
> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
> ---
> v3: add fixup devicetree for t2081qds.
> v2: some update for serdes and network configuration.

Applied to u-boot-mpc85xx/master. Thanks.

York