[U-Boot] [PATCH v3 1/2] watchdog/denali: Adding DesignWare watchdog driver support

[Michal Simek <monstr@monstr.eu>]

On 02/27/2014 08:52 PM, Chin Liang See wrote:
> Hi Michal,
> 
> On Mon, 2014-02-24 at 08:51 +0100, Michal Simek wrote:
>> On 02/21/2014 09:57 PM, Chin Liang See wrote:
>>> To add the DesignWare watchdog driver support. It required
>>> information such as register base address and clock info from
>>> configuration header file  within include/configs folder.
>>>
>>> Signed-off-by: Chin Liang See <clsee@altera.com>
>>> Cc: Anatolij Gustschin <agust@denx.de>
>>> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
>>> Cc: Heiko Schocher <hs@denx.de>
>>> Cc: Tom Rini <trini@ti.com>
>>> ---
>>> Changes for v3
>>> - Split to 2 series patch
>>> Changes for v2
>>> - Enable this driver at socfpga_cyclone5 board
>>> ---
>>>  drivers/watchdog/Makefile         |    1 +
>>>  drivers/watchdog/designware_wdt.c |   73 +++++++++++++++++++++++++++++++++++++
>>>  2 files changed, 74 insertions(+)
>>>  create mode 100644 drivers/watchdog/designware_wdt.c
>>>
>>
>> Checkpatch.
>> total: 0 errors, 1 warnings, 1 checks, 77 lines checked
> 
> Fixed
> 
>>
>>
>>> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
>>> index 06ced10..0276a10 100644
>>> --- a/drivers/watchdog/Makefile
>>> +++ b/drivers/watchdog/Makefile
>>> @@ -15,3 +15,4 @@ obj-$(CONFIG_S5P)               += s5p_wdt.o
>>>  obj-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o
>>>  obj-$(CONFIG_BFIN_WATCHDOG)  += bfin_wdt.o
>>>  obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
>>> +obj-$(CONFIG_DESIGNWARE_WATCHDOG) += designware_wdt.o
>>> diff --git a/drivers/watchdog/designware_wdt.c b/drivers/watchdog/designware_wdt.c
>>> new file mode 100644
>>> index 0000000..cb88844
>>> --- /dev/null
>>> +++ b/drivers/watchdog/designware_wdt.c
>>> @@ -0,0 +1,73 @@
>>> +/*
>>> + * Copyright (C) 2013 Altera Corporation <www.altera.com>
>>
>> 2014?
> 
> Oops, good catch. Fixed
> 
>>
>>
>>> + *
>>> + * SPDX-License-Identifier:	GPL-2.0+
>>> + */
>>> +
>>> +#include <common.h>
>>> +#include <watchdog.h>
>>> +#include <asm/io.h>
>>> +#include <asm/utils.h>
>>> +
>>> +#define DW_WDT_CR	0x00
>>> +#define DW_WDT_TORR	0x04
>>> +#define DW_WDT_CRR	0x0C
>>> +
>>> +#define DW_WDT_CR_EN_OFFSET	0x00
>>> +#define DW_WDT_CR_RMOD_OFFSET	0x01
>>> +#define DW_WDT_CR_RMOD_VAL	0x00
>>> +#define DW_WDT_CRR_RESTART_VAL	0x76
>>> +
>>> +/*
>>> + * Set the watchdog time interval.
>>> + * Counter is 32 bit.
>>> + */
>>> +int designware_wdt_settimeout(unsigned int timeout)
>>> +{
>>> +	signed int i;
>>
>> you should separate variables from code.
> 
> Actually I am trying to avoid to create a new header as its just few
> simple defines.

don't get you. I just thought to add one more blank line below this
line.

Thanks,
Michal



-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 263 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140228/88b8df8b/attachment.pgp>