From mboxrd@z Thu Jan  1 00:00:00 1970
From: Minkyu Kang <mk7.kang@samsung.com>
Date: Thu, 06 Mar 2014 15:58:41 +0900
Subject: [U-Boot] [PATCH 2/3] arm: exynos: pinmux: Add sdmmc4 gpio
 configuration
In-Reply-To: <53168483.2080109@samsung.com>
References: <53168483.2080109@samsung.com>
Message-ID: <53181CA1.2000406@samsung.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 05/03/14 10:57, Beomho Seo wrote:
> For use dwmmc controller, add SDMMC4 gpio configuration.
> 
> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
> Cc: Minkyu Kang <mk7.kang@samsung.com>
> ---
>  arch/arm/cpu/armv7/exynos/pinmux.c |   20 +++++++++++++++-----
>  1 file changed, 15 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
> index 645c497..a67664f 100644
> --- a/arch/arm/cpu/armv7/exynos/pinmux.c
> +++ b/arch/arm/cpu/armv7/exynos/pinmux.c
> @@ -623,16 +623,25 @@ static int exynos4_mmc_config(int peripheral, int flags)
>  	struct exynos4_gpio_part2 *gpio2 =
>  		(struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
>  	struct s5p_gpio_bank *bank, *bank_ext;
> +	unsigned int func, func_ext = 0;

please do not set initial value.
please set value explicitly at switch..case statement instead.

>  	int i;
> 
>  	switch (peripheral) {
>  	case PERIPH_ID_SDMMC0:
>  		bank = &gpio2->k0;
>  		bank_ext = &gpio2->k1;
> +		func = GPIO_FUNC(0x2);
> +		func_ext = GPIO_FUNC(0x3);
>  		break;
>  	case PERIPH_ID_SDMMC2:
>  		bank = &gpio2->k2;
> -		bank_ext = &gpio2->k3;
> +		func = GPIO_FUNC(0x2);
> +		break;
> +	case PERIPH_ID_SDMMC4:
> +		bank = &gpio2->k0;
> +		bank_ext = &gpio2->k1;
> +		func = GPIO_FUNC(0x3);
> +		func_ext = GPIO_FUNC(0x4);
>  		break;
>  	default:
>  		return -1;
> @@ -640,13 +649,14 @@ static int exynos4_mmc_config(int peripheral, int flags)
>  	for (i = 0; i < 7; i++) {
>  		if (i == 2)
>  			continue;
> -		s5p_gpio_cfg_pin(bank, i,  GPIO_FUNC(0x2));
> +		s5p_gpio_cfg_pin(bank, i, func);
>  		s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
>  		s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
>  	}
> -	if (flags & PINMUX_FLAG_8BIT_MODE) {
> +	if ((flags & PINMUX_FLAG_8BIT_MODE) &&
> +			~(peripheral & PERIPH_ID_SDMMC2)) {

Actually, I can't catch easily what you expected here.
So.. could you please modify more readable?

>  		for (i = 3; i < 7; i++) {
> -			s5p_gpio_cfg_pin(bank_ext, i,  GPIO_FUNC(0x3));
> +			s5p_gpio_cfg_pin(bank_ext, i,  func_ext);
>  			s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_NONE);
>  			s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X);
>  		}
> @@ -710,10 +720,10 @@ static int exynos4_pinmux_config(int peripheral, int flags)
>  		break;
>  	case PERIPH_ID_SDMMC0:
>  	case PERIPH_ID_SDMMC2:
> +	case PERIPH_ID_SDMMC4:
>  		return exynos4_mmc_config(peripheral, flags);
>  	case PERIPH_ID_SDMMC1:
>  	case PERIPH_ID_SDMMC3:
> -	case PERIPH_ID_SDMMC4:
>  		debug("SDMMC device %d not implemented\n", peripheral);
>  		return -1;
>  	default:
> 

Thanks,
Minkyu Kang.