[U-Boot] [PATCH v2 0/4] samsung: Add mmc controller to use dwmmc

[Piotr Wilczek <p.wilczek@samsung.com>]

On 03/14/2014 09:33 AM, Beomho Seo wrote:
> This patch set for use dw mmc controller.
> Patch enable supporting device tree for dw mmc controller.
> For use dwmmc controller on trats2 board, enable configuration
> dw_mmc, exynos_dwmmc, bounce_buffer and then disable sdhci configuration.
> This patch set tested on TRATS2 board.
>
> Changes for v2:
> - Use device tree for dw mmc controller.
> - dw mmc node is added device node on exynos4 device tree.
> - dw mmc controller driver is fixed for use exynos4 and 5.
> - add fdt compat id of exynos4 dwmmc.
> - Add comment.
>
> Beomho Seo (4):
>    drivers: mmc: dwmmc: enable support for DT
>    arm: exynos: pinmux: Add sdmmc4 gpio configuration
>    arm: exynos: clock: Remove exynos4x12_set_mmc_clk function
>    board: trats2: Enable device tree on Trats2
>
I tested this series on Trats2.
Tested-by: Piotr Wilczek <p.wilczek@samsung.com>

>   arch/arm/cpu/armv7/exynos/clock.c  |   29 +----------------------------
>   arch/arm/cpu/armv7/exynos/pinmux.c |   19 +++++++++++++++----
>   arch/arm/dts/exynos4.dtsi          |    8 ++++++++
>   arch/arm/dts/exynos4412-trats2.dts |    8 ++++++++
>   drivers/mmc/exynos_dw_mmc.c        |   20 ++++++++++++++++----
>   include/fdtdec.h                   |    1 +
>   lib/fdtdec.c                       |    1 +
>   7 files changed, 50 insertions(+), 36 deletions(-)
>