[U-Boot] [PATCH] ARM: tegra: add Jetson TK1 board

[Stephen Warren <swarren@wwwdotorg.org>]

On 03/26/2014 02:59 PM, Tom Warren wrote:
> I'll fix it on application. Pinmux changes and this patch should be in/tested late today, and if it looks good to you I'll issue a PR to Albert.

Aren't you only sending "ARM: tegra: make all I2C ports open-drain" for
2014.04? I was assuming the other pinmux driver change would all go into
the next release, since they were posted well after the merge window.

>> -----Original Message-----
>> From: Stephen Warren [mailto:swarren at wwwdotorg.org]
>> Sent: Tuesday, March 25, 2014 12:17 PM
>> To: Wolfgang Denk; Tom Warren
>> Cc: u-boot at lists.denx.de; Simon Glass; Stephen Warren
>> Subject: Re: [U-Boot] [PATCH] ARM: tegra: add Jetson TK1 board
>>
>> On 03/25/2014 01:13 PM, Wolfgang Denk wrote:
>>> Dear Stephen,
>>>
>>> In message <1395769173-8143-1-git-send-email-
>> swarren at wwwdotorg.org> you wrote:
>>>>
>>>> Jetson TK1 is an NVIDIA Tegra124 reference board, which shares much
>>>> of its design with Venice2.
>>> ...
>>>> +++ b/include/configs/jetson-tk1.h
>>>> @@ -0,0 +1,79 @@
>>>> +/*
>>>> + * (C) Copyright 2013-2014
>>>> + * NVIDIA Corporation <www.nvidia.com>
>>>> + *
>>>> + * SPDX-License-Identifier:     GPL-2.0
>>>
>>> Is there any specific reason this is not GPL-2.0+ ?
>>
>> Oops. I evidently cut/paste from the wrong place. Please consider that to say
>> GPL-2.0+. Tom, can you fix this while applying, or do you want a repost (I'd
>> probably hold off on a repost until after 2014.04 is out in case there are any
>> other comments).
> --
> nvpublic
>