From: Heiko Schocher <hs@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 6/9] i2c, davinci: convert driver to new mutlibus/mutliadapter framework
Date: Mon, 31 Mar 2014 07:24:22 +0200 [thread overview]
Message-ID: <5338FC06.3000902@denx.de> (raw)
In-Reply-To: <1395935952-11542-7-git-send-email-m-karicheri2@ti.com>
Hello Mruali,
Am 27.03.2014 16:59, schrieb Murali Karicheri:
> From: Vitaly Andrianov<vitalya@ti.com>
>
> - add davinci driver to new multibus/multiadpater support
> - adapted all config files, which uses this driver
>
> Signed-off-by: Vitaly Andrianov<vitalya@ti.com>
> Signed-off-by: Murali Karicheri<m-karicheri2@ti.com>
> ---
> arch/arm/cpu/arm926ejs/davinci/dm355.c | 2 +-
> arch/arm/cpu/arm926ejs/davinci/dm365.c | 2 +-
> arch/arm/cpu/arm926ejs/davinci/dm644x.c | 2 +-
> arch/arm/cpu/arm926ejs/davinci/dm646x.c | 2 +-
> drivers/i2c/Makefile | 2 +-
> drivers/i2c/davinci_i2c.c | 401 ++++++++++++++++++-------------
> drivers/i2c/davinci_i2c.h | 27 ++-
> include/configs/cam_enc_4xx.h | 8 +-
> include/configs/da830evm.h | 8 +-
> include/configs/da850evm.h | 8 +-
> include/configs/davinci_dm355evm.h | 8 +-
> include/configs/davinci_dm355leopard.h | 8 +-
> include/configs/davinci_dm365evm.h | 8 +-
> include/configs/davinci_dm6467evm.h | 8 +-
> include/configs/davinci_dvevm.h | 8 +-
> include/configs/davinci_schmoogie.h | 8 +-
> include/configs/davinci_sffsdr.h | 8 +-
> include/configs/davinci_sonata.h | 8 +-
> include/configs/ea20.h | 6 +-
> include/configs/enbw_cmc.h | 8 +-
> 20 files changed, 305 insertions(+), 235 deletions(-)
This is your v4 post ... some sort of history, what has changed
would be nice ...
[...]
> diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
> index 36d5e5f..fd1cb11 100644
> --- a/drivers/i2c/Makefile
> +++ b/drivers/i2c/Makefile
> @@ -6,7 +6,7 @@
> #
>
> obj-$(CONFIG_BFIN_TWI_I2C) += bfin-twi_i2c.o
> -obj-$(CONFIG_DRIVER_DAVINCI_I2C) += davinci_i2c.o
> +obj-$(CONFIG_SYS_I2C_DAVINCI) += davinci_i2c.o
please keep lists sorted.
> obj-$(CONFIG_DW_I2C) += designware_i2c.o
> obj-$(CONFIG_I2C_MVTWSI) += mvtwsi.o
> obj-$(CONFIG_I2C_MV) += mv_i2c.o
[...]
Rest looks Ok for me ... if checkpatch drops no errors and warnings
and MAKEALL compiles clean ;-)
bye,
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
next prev parent reply other threads:[~2014-03-31 5:24 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-27 15:59 [U-Boot] [PATCH v4 0/9] Add support for keystone2 SoC and K2HK EVM Murali Karicheri
2014-03-27 15:59 ` [U-Boot] [PATCH v4 1/9] fdt: call ft_board_setup_ex() at the end of image_setup_libfdt() Murali Karicheri
2014-03-27 15:59 ` [U-Boot] [PATCH v4 2/9] tools: mkimage: add support for gpimage format Murali Karicheri
2014-03-27 15:59 ` [U-Boot] [PATCH v4 3/9] arm: add support for arch timer Murali Karicheri
2014-03-27 15:59 ` [U-Boot] [PATCH v4 4/9] NAND: DaVinci: allow forced disable of subpage writes Murali Karicheri
2014-03-27 15:59 ` [U-Boot] [PATCH v4 5/9] i2c, davinci: move i2c_defs.h to the drivers/i2c directory Murali Karicheri
2014-03-27 15:59 ` [U-Boot] [PATCH v4 6/9] i2c, davinci: convert driver to new mutlibus/mutliadapter framework Murali Karicheri
2014-03-31 5:24 ` Heiko Schocher [this message]
2014-03-31 20:23 ` Karicheri, Muralidharan
2014-04-01 5:12 ` Heiko Schocher
2014-03-27 15:59 ` [U-Boot] [PATCH v4 7/9] k2hk: add support for k2hk SOC and EVM Murali Karicheri
2014-03-28 17:47 ` Tom Rini
2014-03-27 15:59 ` [U-Boot] [PATCH v4 8/9] spi: davinci: add support for multiple bus and chip select Murali Karicheri
2014-03-27 15:59 ` [U-Boot] [PATCH v4 9/9] k2hk-evm: add configuration for spi1 and spi2 support Murali Karicheri
2014-03-27 16:01 ` [U-Boot] [PATCH v4 0/9] Add support for keystone2 SoC and K2HK EVM Karicheri, Muralidharan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5338FC06.3000902@denx.de \
--to=hs@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox