From: Prabhakar Kushwaha <prabhakar@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 10/10] board/t104xrdb: Add support of NAND, SD, SPI boot for T1040RDB
Date: Tue, 1 Apr 2014 07:47:19 +0530 [thread overview]
Message-ID: <533A21AF.80801@freescale.com> (raw)
In-Reply-To: <loom.20140401T014144-70@post.gmane.org>
On 4/1/2014 5:14 AM, Rommel G Custodio wrote:
> Rommel G Custodio <sessyargc+u-boot <at> gmail.com> writes:
>
>> Dear Prabhakar Kushwaha,
>>
>> Prabhakar Kushwaha <prabhakar <at> freescale.com> writes:
>>
>>> Add support of 2 stage NAND, SD, SPI boot loader using SPL framework.
>>> here, PBL initialise the internal SRAM and copy SPL(160KB). This further
>>> initialise DDR using SPD and environment and copy u-boot(768 KB) from
> NAND
>> to DDR.
>>> Finally SPL transer control to u-boot.
>> This patch does not apply to HEAD.
> Arrggh ... guess I think I need this
>
> [U-BOOT] [PATCH v3] powerpc/t104xrdb: Unification of T104xRDB header
> files
>
You may also need below patches in sequence
[U-Boot,U-BOOT,v3] powerpc/t104xrdb: Unification of T104xRDB header files
[U-Boot] powerpc/mpc85xx:Add CONFIG_SYS_FSL_ERRATUM_ESDHC111 to Txx/Bxx
[U-Boot,01/2] powerpc/mpc85xx:Avoid fix address of bootpg section
[U-Boot,2/2] powerpc/mpc85xx:Update MONITOR_LEN
[U-Boot] driver/mmc: fix compile warnings
+ 2 stage boot loader patch set
Please let me know, if any other information is required.
Regards,
Prabhakar
next prev parent reply other threads:[~2014-04-01 2:17 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-31 10:05 [U-Boot] [PATCH 10/10] board/t104xrdb: Add support of NAND, SD, SPI boot for T1040RDB Prabhakar Kushwaha
2014-03-31 23:10 ` Rommel G Custodio
2014-03-31 23:44 ` Rommel G Custodio
2014-04-01 2:17 ` Prabhakar Kushwaha [this message]
2014-04-01 2:13 ` Prabhakar Kushwaha
2014-04-01 6:50 ` Rommel G Custodio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=533A21AF.80801@freescale.com \
--to=prabhakar@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox