From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Tue, 01 Apr 2014 10:34:38 +0200 Subject: [U-Boot] [PATCH 2/2] arm: mxs: Add serial console support into SPL In-Reply-To: <1395192096-6484-2-git-send-email-marex@denx.de> References: <1395192096-6484-1-git-send-email-marex@denx.de> <1395192096-6484-2-git-send-email-marex@denx.de> Message-ID: <533A7A1E.4090205@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 19/03/2014 02:21, Marek Vasut wrote: > Add support for serial console into the i.MX23/i.MX28 SPL. A full, > uncrippled serial console support comes very helpful when debugging > various spectacular hardware bringup issues early in the process. > Because we do not use SPL framework, but have our own minimalistic > SPL, which is compatible with the i.MX23/i.MX28 BootROM, we do not > use preloader_console_init(), but instead use a similar function to > start the console. Nonetheless, to avoid blowing up the size of the > SPL binary, this support is enabled only if CONFIG_SPL_SERIAL_SUPPORT > is defined, which is disabled by default. > > Signed-off-by: Marek Vasut > Cc: Stefano Babic > --- Applied after fixing warning: arch/arm/cpu/arm926ejs/mxs/spl_boot.c:22:13: warning: 'bdata' defined but not used to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================