From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/8] imx-common: add board_video_skip
Date: Fri, 04 Apr 2014 12:05:06 +0200 [thread overview]
Message-ID: <533E83D2.3040000@denx.de> (raw)
In-Reply-To: <1396468670-29774-1-git-send-email-eric@eukrea.com>
Hi Eric,
On 02/04/2014 21:57, Eric B?nard wrote:
> this function is shared by several board and thus can be factorized
>
> Signed-off-by: Eric B?nard <eric@eukrea.com>
> ---
> arch/arm/imx-common/Makefile | 1 +
> arch/arm/imx-common/video.c | 55 +++++++++++++++++++++++++++++++++
> arch/arm/include/asm/imx-common/video.h | 20 ++++++++++++
> 3 files changed, 76 insertions(+)
> create mode 100644 arch/arm/imx-common/video.c
> create mode 100644 arch/arm/include/asm/imx-common/video.h
>
> diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
> index 16809fe..2a7fc42 100644
> --- a/arch/arm/imx-common/Makefile
> +++ b/arch/arm/imx-common/Makefile
> @@ -19,6 +19,7 @@ obj-y += misc.o
> endif
> ifeq ($(SOC),$(filter $(SOC),mx6))
> obj-$(CONFIG_CMD_SATA) += sata.o
> +obj-$(CONFIG_IMX_VIDEO_SKIP) += video.o
> endif
> obj-$(CONFIG_CMD_BMODE) += cmd_bmode.o
> obj-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o
> diff --git a/arch/arm/imx-common/video.c b/arch/arm/imx-common/video.c
> new file mode 100644
> index 0000000..8db5a84
> --- /dev/null
> +++ b/arch/arm/imx-common/video.c
> @@ -0,0 +1,55 @@
> +/*
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/errno.h>
> +#include <asm/imx-common/video.h>
> +
> +extern struct display_info_t const displays[];
> +extern size_t display_number;
> +
> +int board_video_skip(void)
> +{
> + int i;
> + int ret;
> + char const *panel = getenv("panel");
> + if (!panel) {
> + for (i = 0; i < display_number; i++) {
> + struct display_info_t const *dev = displays+i;
> + if (dev->detect && dev->detect(dev)) {
> + panel = dev->mode.name;
> + printf("auto-detected panel %s\n", panel);
> + break;
> + }
> + }
> + if (!panel) {
> + panel = displays[0].mode.name;
> + printf("No panel detected: default to %s\n", panel);
> + i = 0;
> + }
> + } else {
> + for (i = 0; i < display_number; i++) {
> + if (!strcmp(panel, displays[i].mode.name))
> + break;
> + }
> + }
> + if (i < display_number) {
> + ret = ipuv3_fb_init(&displays[i].mode, 0,
> + displays[i].pixfmt);
> + if (!ret) {
> + displays[i].enable(displays+i);
> + printf("Display: %s (%ux%u)\n",
> + displays[i].mode.name,
> + displays[i].mode.xres,
> + displays[i].mode.yres);
> + } else
> + printf("LCD %s cannot be configured: %d\n",
> + displays[i].mode.name, ret);
> + } else {
> + printf("unsupported panel %s\n", panel);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> diff --git a/arch/arm/include/asm/imx-common/video.h b/arch/arm/include/asm/imx-common/video.h
> new file mode 100644
> index 0000000..e0c4ef4
> --- /dev/null
> +++ b/arch/arm/include/asm/imx-common/video.h
> @@ -0,0 +1,20 @@
> +/*
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef __IMX_VIDEO_H_
> +#define __IMX_VIDEO_H_
> +
> +#include <linux/fb.h>
> +#include <ipu_pixfmt.h>
> +
> +struct display_info_t {
> + int bus;
> + int addr;
> + int pixfmt;
> + int (*detect)(struct display_info_t const *dev);
> + void (*enable)(struct display_info_t const *dev);
> + struct fb_videomode mode;
> +};
> +
> +#endif
>
Nice clean up, thanks for this !
Acked-by: Stefano Babic <sbabic@denx.de>
Regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2014-04-04 10:05 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-02 19:57 [U-Boot] [PATCH 1/8] imx-common: add board_video_skip Eric Bénard
2014-04-02 19:57 ` [U-Boot] [PATCH 2/8] nitrogen6x: use common board_video_skip Eric Bénard
2014-04-04 0:57 ` Eric Nelson
2014-04-02 19:57 ` [U-Boot] [PATCH 3/8] mx6sabresd: " Eric Bénard
2014-04-02 19:57 ` [U-Boot] [PATCH 4/8] RiOTboard and MarSBoard: add new boards support Eric Bénard
2014-04-04 10:12 ` Stefano Babic
2014-04-04 14:51 ` selsinork at gmail.com
2014-04-04 17:08 ` Eric Bénard
2014-04-02 19:57 ` [U-Boot] [PATCH 5/8] imx-common/video: add detect_hdmi Eric Bénard
2014-04-02 19:57 ` [U-Boot] [PATCH 6/8] nitrogen6x: use common detect_hdmi Eric Bénard
2014-04-04 0:47 ` Eric Nelson
2014-04-02 19:57 ` [U-Boot] [PATCH 7/8] mx6sabresd: " Eric Bénard
2014-04-02 19:57 ` [U-Boot] [PATCH 8/8] embest/mx6boards: " Eric Bénard
2014-04-04 10:05 ` Stefano Babic [this message]
-- strict thread matches above, loose matches on Subject: below --
2014-04-02 19:57 [U-Boot] [PATCH 1/8] imx-common: add board_video_skip Eric Bénard
2014-04-04 0:56 ` Eric Nelson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=533E83D2.3040000@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox