[U-Boot] [PATCH v3 4/5] usb/gadget: add the fastboot gadget

[Bo Shen <voice.shen@atmel.com>]

Hi Rob,

On 04/11/2014 08:55 PM, Rob Herring wrote:
> On Fri, Apr 11, 2014 at 2:14 AM, Bo Shen <voice.shen@atmel.com> wrote:
>> Hi Rob Herring,
>>    I am just do a function testing on Atmel sama5d3xek board. And a small
>> comment as following.
>>
>>    Btw, do you test to transfer big size file. I try a file bigger than
>> 100MiB, it will hang. However use DFU or RNDIS don't meet this issue.
>
> How much RAM do you have? It will happily download into the end of RAM
> overwriting u-boot if loadsize is not set. DFU at least has its own
> buffer size configuration.

There are 512MiB RAM on board. So, it won't be a problem to load this 
file from the begin of the RAM (As the u-boot is relocated to top RAM).

>>
>>
>> On 04/11/2014 03:18 AM, Rob Herring wrote:
>>>
>>> +static void fastboot_unbind(struct usb_gadget *gadget)
>>> +{
>>> +       usb_ep_free_request(gadget->ep0, ep0_req);
>>> +       ep_in->driver_data = NULL;
>>> +       ep_out->driver_data = NULL;
>>> +
>>> +       gadget_is_connected = 0;
>>> +       usb_gadget_disconnect(gadget);
>>> +}
>>
>>
>> [snip]
>>
>>
>>> +static void fastboot_disconnect(struct usb_gadget *gadget)
>>> +{
>>> +       fastboot_disable_ep(gadget);
>>> +       gadget_is_connected = 0;
>>
>>
>> Do this only in unbind, as unbind is really disconnect.
>
> So, what should disconnect function do?

Maybe some misunderstanding. I mean the "gadget_is_connected" should be 
cleared in unbind function while not in disconnect function.

> Rob
>

Best Regards,
Bo Shen