From mboxrd@z Thu Jan  1 00:00:00 1970
From: Prabhakar Kushwaha <prabhakar@freescale.com>
Date: Thu, 17 Apr 2014 09:11:55 +0530
Subject: [U-Boot] [PATCH 01/2] powerpc/mpc85xx:Avoid fix address of
	bootpg section
In-Reply-To: <534F1B2A.6020906@freescale.com>
References: <1396260094-2328-1-git-send-email-prabhakar@freescale.com>
	<533CDD4E.4080900@freescale.com> <534F1B2A.6020906@freescale.com>
Message-ID: <534F4D83.7010602@freescale.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de


On 4/17/2014 5:37 AM, York Sun wrote:
> On 04/02/2014 09:02 PM, Prabhakar Kushwaha wrote:
>> Hi All,
>>
>> I just want to share my concern with respect to this patch.
>> This patch removed hard-coded value for 0x80000 and use CONFIG_SYS_MONITOR_LEN.
>>
>> There were many Freescale boards config which don?t have correct
>> CONFIG_SYS_MONITOR_LEN(due to size increase from 512KB to 768KB). I fixed them
>> in subsequent patch.
>>
>> This linker file is being used by many other powerpc boards/platforms. Because
>> of hard-coded value of 0x80000 in linker file, there boards are booting till now.
>> but after this patch,  there is a possibility there boards may not boot because
>> of wrong value defined for CONFIG_SYS_MONITOR_LEN by board maintainers.
>>
>> I will request powerpc board maintainers to check config file for correct value
>> of CONFIG_SYS_MONITOR_LEN.
>>
>>
> Prabhakar,
>
> Where are we for this patch? I don't see any comment.
>
>

I did not get any comments :(

Looks like every one is OK with it.

regards,
Prabhakar