[U-Boot] [PATCH 1/2] usb: r8a66597: Fix initialization hub that using, R8A66597_MAX_ROOT_HUB

[Yasuhisa Umano <yasuhisa.umano.zc@renesas.com>]

Hi,
Thanks for your comment.

(2014/04/17 23:07), Marek Vasut wrote:
> On Thursday, April 17, 2014 at 09:48:32 AM, yasuhisa umano wrote:
>> This driver is processed as two USB hub despite one.
>> The number of root hub is defined in R8A66597_MAX_ROOT_HUB.
>> This fixes that register is accessed by using the definition
>> of R8A66597_MAX_ROOT_HUB.
>>
>> Signed-off-by: Yasuhisa Umano <yasuhisa.umano.zc@renesas.com>
>> ---
>>   drivers/usb/host/r8a66597-hcd.c |    4 ++--
>>   1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/usb/host/r8a66597-hcd.c
>> b/drivers/usb/host/r8a66597-hcd.c index dfe5423..c58d2a9 100644
>> --- a/drivers/usb/host/r8a66597-hcd.c
>> +++ b/drivers/usb/host/r8a66597-hcd.c
>> @@ -164,8 +164,8 @@ static int enable_controller(struct r8a66597 *r8a66597)
>>
>>   	r8a66597_bset(r8a66597, INTL, SOFCFG);
>>   	r8a66597_write(r8a66597, 0, INTENB0);
>> -	r8a66597_write(r8a66597, 0, INTENB1);
>> -	r8a66597_write(r8a66597, 0, INTENB2);
>> +	for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++)
>> +		r8a66597_write(r8a66597, 0, get_intenb_reg(port));
>
> Hmm, looking at get_intenb_reg(), this is slightly dangerous, but I will trust
> you you know what you are doing . I am a bit worried someone might set
> R8A66597_MAX_ROOT_HUB to value >2 and will wonder why doesn't it work.

I understood your point.
Certainly, current?device drivers support only the initialization of 1 or 2 
interrupt for hub.
If this driver has a hub of more future, I will send the patch.

>
> Anyway, I will apply this and if you feel my rant is valid, submit subsequent
> patch.

Thank you.
>
> Best regards,
> Marek Vasut
>

Best regards,
Yasuhisa