From mboxrd@z Thu Jan  1 00:00:00 1970
From: Bo Shen <voice.shen@atmel.com>
Date: Thu, 24 Apr 2014 11:10:09 +0800
Subject: [U-Boot] [RFC PATCH 2/2] arm:at91: enable ROM loadable atmel
	image
In-Reply-To: <1398263365-17931-3-git-send-email-andreas.devel@googlemail.com>
References: <1398263365-17931-1-git-send-email-andreas.devel@googlemail.com>
	<1398263365-17931-3-git-send-email-andreas.devel@googlemail.com>
Message-ID: <53588091.7070705@atmel.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Andreas,

On 04/23/2014 10:29 PM, Andreas Bie?mann wrote:
> For sama5d3xek we need to modify the SPL image for correct detection by ROM
> code.
>
> Signed-off-by: Andreas Bie?mann <andreas.devel@googlemail.com>

For whole series,
Tested-by: Bo Shen <voice.shen@atmel.com>

> ---
>
>   arch/arm/cpu/armv7/at91/config.mk |   10 ++++++++++
>   spl/Makefile                      |    5 +++++
>   2 files changed, 15 insertions(+)
>   create mode 100644 arch/arm/cpu/armv7/at91/config.mk
>
> diff --git a/arch/arm/cpu/armv7/at91/config.mk b/arch/arm/cpu/armv7/at91/config.mk
> new file mode 100644
> index 0000000..09eab70
> --- /dev/null
> +++ b/arch/arm/cpu/armv7/at91/config.mk
> @@ -0,0 +1,10 @@
> +#
> +# Copyright (C) 2014, Andreas Bie?mann <andreas.devel@googlemail.com>
> +#
> +# SPDX-License-Identifier:	GPL-2.0+
> +#
> +ifdef CONFIG_SPL_BUILD
> +ALL-y	+= boot.bin
> +else
> +ALL-y	+= u-boot.img
> +endif
> diff --git a/spl/Makefile b/spl/Makefile
> index 6fec252..031bf54 100644
> --- a/spl/Makefile
> +++ b/spl/Makefile
> @@ -182,6 +182,11 @@ MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE)
>   MLO MLO.byteswap: $(obj)/u-boot-spl.bin
>   	$(call if_changed,mkimage)
>
> +MKIMAGEFLAGS_boot.bin = -T atmelimage
> +
> +boot.bin: $(obj)/u-boot-spl.bin
> +	$(call if_changed,mkimage)
> +
>   ALL-y	+= $(obj)/$(SPL_BIN).bin
>
>   ifdef CONFIG_SAMSUNG
>

Best Regards,
Bo Shen