From mboxrd@z Thu Jan  1 00:00:00 1970
From: =?ISO-8859-1?Q?=22David_M=FCller_=28ELSOFT_AG=29=22?= <d.mueller@elsoft.ch>
Date: Thu, 24 Apr 2014 16:58:34 +0200
Subject: [U-Boot] iMX6 PCie inbound traffic not working
Message-ID: <5359269A.7090009@elsoft.ch>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hello

I tried to use a Intel 82574 based miniPCIe NIC on a Freescale iMX6 eval
board as shown below. It seems that the NIC is unable to read and/or
write the descriptors in system memory. The settings of the PCIe core
registers seems to be OK (according to the iMX6 RM).

Any idea what i am missing?


U-Boot 2014.04-00078-gadcdeac-dirty (Apr 24 2014 - 15:40:02)

CPU:   Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: WDOG
Board: MX6-SabreSD
DRAM:  1 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
*** Warning - bad CRC, using default environment

  00:01.0     - 16c3:abcd - Bridge device
   01:00.0    - 8086:10d3 - Network controller
No panel detected: default to Hannstar-XGA
Display: Hannstar-XGA (1024x768)
In:    serial
Out:   serial
Err:   serial
Net:   e1000: 00:03:1d:0c:57:86
       e1000#0
Warning: e1000#0 using MAC address from net device


Dave