From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Mon, 28 Apr 2014 11:05:24 +0200 Subject: [U-Boot] [PATCH] ARM: imx6: nitrogen6x: Enable CONFIG_SYS_GENERIC_BOARD In-Reply-To: <201404280705.27920.marex@denx.de> References: <1398467746-13684-1-git-send-email-eric.nelson@boundarydevices.com> <201404280705.27920.marex@denx.de> Message-ID: <535E19D4.8000901@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 28/04/2014 07:05, Marek Vasut wrote: > On Saturday, April 26, 2014 at 01:15:46 AM, Eric Nelson wrote: > > You should learn to write sensible commit messages ;-) > Well, the current main issue is the warning, but the subject already says what is the change. IMHO the patch is ok. I will add myself by merging the same commit message that Fabio adds for his patchset on the same issue: Enable CONFIG_SYS_GENERIC_BOARD, so that we get rid of the following warning on boot: "Warning: Your board does not use generic board. Please read doc/README.generic-board and take action. Boards not upgraded by the late 2014 may break or be removed." This completes the patch and address Marek's comment. >> Signed-off-by: Eric Nelson >> --- >> Note that this seems a bit premature until we have some infrastructure >> around DTB files in place, but we certainly don't want big hairy >> warning messages on our boards. >> >> Is anyone planning on pulling in at least the pinfunc and .dtsi >> files for i.MX? I'm not sure how much else will be useful in U-Boot. I have currently no projects in this direction, so personally I will not work in a short amount of time on this topic. However, I agree that the first thing for a DTS in U-Boot should be the pinmux. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================