[U-Boot] [PATCH] dwc_ahsata: return failure for MX6 if not IMX6Q

[Stefano Babic <sbabic@denx.de>]

Hi Tim,

On 06/05/2014 07:22, Tim Harvey wrote:
> The IMX6QUAD/DUAL have SATA, but the IMX6SOLO/DL do not. Return an error
> indicating no such port instead of attempting a memory access that results
> in a data abort and reset. This dynamic detection is necessary for bootloaders
> that support multiple variants of the IMX6 SoC.
> 

Right !

> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> ---
>  drivers/block/dwc_ahsata.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/block/dwc_ahsata.c b/drivers/block/dwc_ahsata.c
> index 3569214..638a585 100644
> --- a/drivers/block/dwc_ahsata.c
> +++ b/drivers/block/dwc_ahsata.c
> @@ -17,6 +17,7 @@
>  #include <asm/io.h>
>  #include <linux/bitops.h>
>  #include <asm/arch/clock.h>
> +#include <asm/arch/sys_proto.h>
>  #include "dwc_ahsata.h"
>  
>  struct sata_port_regs {
> @@ -558,6 +559,12 @@ int init_sata(int dev)
>  	u32 linkmap;
>  	struct ahci_probe_ent *probe_ent = NULL;
>  
> +#if defined(CONFIG_MX6)
> +	if (!is_cpu_type(MXC_CPU_MX6Q)) {
> +		printf("No device detected!\n");

Change only printf with puts. We use puts() in u-boot when we print a
fixed string.
Really I had drop the whole line. It is not that a SATA device is not
attached or not detected, but it is that a SATA is not possible at all.
It is like this is an error, but it is not: it is the real use case.


Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================