[U-Boot] [PATCH] dwc_ahsata: return failure for MX6 if not IMX6Q

[Troy Kisky <troy.kisky@boundarydevices.com>]

On 5/5/2014 10:22 PM, Tim Harvey wrote:
> The IMX6QUAD/DUAL have SATA, but the IMX6SOLO/DL do not. Return an error
> indicating no such port instead of attempting a memory access that results
> in a data abort and reset. This dynamic detection is necessary for bootloaders
> that support multiple variants of the IMX6 SoC.
> 
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> ---
>  drivers/block/dwc_ahsata.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/block/dwc_ahsata.c b/drivers/block/dwc_ahsata.c
> index 3569214..638a585 100644
> --- a/drivers/block/dwc_ahsata.c
> +++ b/drivers/block/dwc_ahsata.c
> @@ -17,6 +17,7 @@
>  #include <asm/io.h>
>  #include <linux/bitops.h>
>  #include <asm/arch/clock.h>
> +#include <asm/arch/sys_proto.h>
>  #include "dwc_ahsata.h"
>  
>  struct sata_port_regs {
> @@ -558,6 +559,12 @@ int init_sata(int dev)
>  	u32 linkmap;
>  	struct ahci_probe_ent *probe_ent = NULL;
>  
> +#if defined(CONFIG_MX6)
> +	if (!is_cpu_type(MXC_CPU_MX6Q)) {

&& !is_cpu_type(MXC_CPU_MX6D)


is needed too ?


Troy