From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Fri, 09 May 2014 14:42:25 +0200 Subject: [U-Boot] [PATCH 4/4] [PATCH] ventana: Add support for the LTC3676 PMIC In-Reply-To: <1399303345-20771-1-git-send-email-tharvey@gateworks.com> References: <5358C679.2060300@denx.de> <1399303345-20771-1-git-send-email-tharvey@gateworks.com> Message-ID: <536CCD31.1070309@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 05/05/2014 17:22, Tim Harvey wrote: > The LTC3676 PMIC is used instead of the PFUZE100 PMIC on the > GW51xx/GW52xx/GW53xx Ventana baseboards. In order to support the IMX6Q SoC > at 1GHz on those baseboards, we need to adjust the voltage scaling for the SW1 > and SW3 DC/DC converters on the LTC3676 for 1225mV. Note that the scalar > values for the LTC3676 are board-specific as they relate to a resistor devider > chosen by the board design. > > Signed-off-by: Tim Harvey > --- Applied after fixing: board/gateworks/gw_ventana/gw_ventana.c: In function 'power_init_board': board/gateworks/gw_ventana/gw_ventana.c:788:1: warning: control reaches end of non-void function [-Wreturn-type] Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================