From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Please pull mpc85xx
Date: Tue, 13 May 2014 11:12:53 -0500 [thread overview]
Message-ID: <53724485.3050800@freescale.com> (raw)
Tom,
The following changes since commit 69c0d323e325f48f3124fb0696de3d68fcbcae8e:
kbuild: Fix trailing whitespaces (2014-05-12 16:31:51 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-mpc85xx.git master
for you to fetch changes up to 8ad5d45e0044f5e64dbe7c6bd4e6aa0121a26b23:
boards.cfg: fix a configuration error of ep8248 board (2014-05-13 11:00:01 -0500)
----------------------------------------------------------------
Alexander Graf (4):
PPC 85xx QEMU: Always assume 1 core
PPC 85xx QEMU: Don't use HID1
powerpc/mpc85xx: Update TLB CAMs in relocated mode
PPC 85xx QEMU: Make a generic board file
Aneesh Bansal (2):
powerpc/mpc85xx: SECURE BOOT- secure boot target for t1040rdb
powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T2080RDB
Chunhe Lan (1):
powerpc/85xx: Add T4240RDB board support
Masahiro Yamada (1):
boards.cfg: fix a configuration error of ep8248 board
Shaohui Xie (1):
powerpc/fman/memac: use default MDIO_HOLD value
Shaveta Leekha (2):
board/freescale/common: ZM7300 driver
board/b4qds: VID support
Shengzhou Liu (2):
powerpc/t208x: enable errata A006261, A006593, A006379
powerpc/85xx: add T4080 SoC support
Stefan Bigler (2):
kmp204x: Add support for the unit LEDs
kmp204x: handle dip-switch for factory settings
Valentin Longchamp (6):
kmp204x: selftest/factory test pin support
kmp204x: update the CONFIG_PRAM and CONFIG_KM_RESERVED_PRAM defines
kmp204x: complete the reset sequence and PRST configuration
kmp204x: update the RCW
kmp204x: add workaround for A-004849
kmp204x: enable the errata command
York Sun (6):
powerpc/mpc8572ds: Increase u-boot size to 768KB
powerpc/mpc85xx: Ignore FDT pointer for non-QEMU in cpu_init_early_f()
powerpc/freescale: Change the return value of mac_read_from_eeprom()
powerpc/mpc85xx: Fix boot_flag for calling board_init_f()
powerpc/mpc86xx: Fix boot_flag for calling board_init_f()
powerpc/freescale: Convert selected boards to generic board architecture
Zhao Qiang (1):
qe: disable qe when qe-ucode fails to be uploaded for "deep sleep"
arch/powerpc/cpu/mpc85xx/Makefile | 2 +
arch/powerpc/cpu/mpc85xx/cpu.c | 24 +
arch/powerpc/cpu/mpc85xx/cpu_init.c | 17 +-
arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 2 +
arch/powerpc/cpu/mpc85xx/speed.c | 3 +-
arch/powerpc/cpu/mpc85xx/spl_minimal.c | 4 +-
arch/powerpc/cpu/mpc85xx/start.S | 4 +-
arch/powerpc/cpu/mpc85xx/t4240_ids.c | 2 +
arch/powerpc/cpu/mpc85xx/t4240_serdes.c | 2 +-
arch/powerpc/cpu/mpc86xx/start.S | 1 +
arch/powerpc/cpu/mpc8xxx/cpu.c | 5 +-
arch/powerpc/include/asm/config_mpc85xx.h | 19 +-
arch/powerpc/include/asm/fsl_errata.h | 5 +
arch/powerpc/include/asm/fsl_secure_boot.h | 3 +-
arch/powerpc/include/asm/immap_85xx.h | 6 +-
arch/powerpc/include/asm/processor.h | 1 +
board/freescale/b4860qds/b4860qds.c | 240 +++++++++
board/freescale/common/Makefile | 1 +
board/freescale/common/sys_eeprom.c | 6 +-
board/freescale/common/zm7300.c | 235 +++++++++
board/freescale/common/zm7300.h | 22 +
board/freescale/qemu-ppce500/qemu-ppce500.c | 20 +
board/freescale/t4rdb/Makefile | 12 +
board/freescale/t4rdb/ddr.c | 118 +++++
board/freescale/t4rdb/ddr.h | 78 +++
board/freescale/t4rdb/eth.c | 146 ++++++
board/freescale/t4rdb/law.c | 28 +
board/freescale/t4rdb/pci.c | 23 +
board/freescale/t4rdb/t4240rdb.c | 125 +++++
board/freescale/t4rdb/t4_pbi.cfg | 31 ++
board/freescale/t4rdb/t4_rcw.cfg | 7 +
board/freescale/t4rdb/t4rdb.h | 18 +
board/freescale/t4rdb/tlb.c | 111 ++++
board/keymile/kmp204x/kmp204x.c | 75 ++-
board/keymile/kmp204x/kmp204x.h | 3 +
board/keymile/kmp204x/pbi.cfg | 43 +-
board/keymile/kmp204x/pci.c | 17 +-
board/keymile/kmp204x/qrio.c | 31 +-
board/keymile/kmp204x/rcw_kmp204x.cfg | 2 +-
boards.cfg | 7 +-
drivers/mmc/fsl_esdhc.c | 2 +-
drivers/net/fm/Makefile | 1 +
drivers/net/fm/memac_phy.c | 8 +-
drivers/qe/qe.c | 9 +-
include/common.h | 5 +-
include/configs/B4860QDS.h | 14 +
include/configs/MPC8536DS.h | 2 +
include/configs/MPC8572DS.h | 5 +-
include/configs/MPC8641HPCN.h | 3 +
include/configs/T208xRDB.h | 1 +
include/configs/T4240RDB.h | 752 +++++++++++++++++++++++++++
include/configs/corenet_ds.h | 3 +
include/configs/km/kmp204x-common.h | 17 +-
include/configs/p1_p2_rdb_pc.h | 3 +
include/configs/qemu-ppce500.h | 1 +
include/configs/t4qds.h | 2 +
56 files changed, 2257 insertions(+), 70 deletions(-)
create mode 100644 board/freescale/common/zm7300.c
create mode 100644 board/freescale/common/zm7300.h
create mode 100644 board/freescale/t4rdb/Makefile
create mode 100644 board/freescale/t4rdb/ddr.c
create mode 100644 board/freescale/t4rdb/ddr.h
create mode 100644 board/freescale/t4rdb/eth.c
create mode 100644 board/freescale/t4rdb/law.c
create mode 100644 board/freescale/t4rdb/pci.c
create mode 100644 board/freescale/t4rdb/t4240rdb.c
create mode 100644 board/freescale/t4rdb/t4_pbi.cfg
create mode 100644 board/freescale/t4rdb/t4_rcw.cfg
create mode 100644 board/freescale/t4rdb/t4rdb.h
create mode 100644 board/freescale/t4rdb/tlb.c
create mode 100644 include/configs/T4240RDB.h
Thanks,
York
next reply other threads:[~2014-05-13 16:12 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-13 16:12 York Sun [this message]
2014-05-13 16:14 ` [U-Boot] Please pull mpc85xx York Sun
2014-05-13 21:45 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2014-11-14 21:20 [U-Boot] please " York Sun
2014-11-17 0:45 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53724485.3050800@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox