From mboxrd@z Thu Jan 1 00:00:00 1970 From: York Sun Date: Tue, 13 May 2014 11:14:51 -0500 Subject: [U-Boot] Please pull mpc85xx In-Reply-To: <53724485.3050800@freescale.com> References: <53724485.3050800@freescale.com> Message-ID: <537244FB.8070708@freescale.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Tom, I forgot to add my "Reviewed-by" for this set. Let me know if I have to fix them. York On 05/13/2014 11:12 AM, York Sun wrote: > Tom, > > The following changes since commit 69c0d323e325f48f3124fb0696de3d68fcbcae8e: > > kbuild: Fix trailing whitespaces (2014-05-12 16:31:51 -0400) > > are available in the git repository at: > > git://git.denx.de/u-boot-mpc85xx.git master > > for you to fetch changes up to 8ad5d45e0044f5e64dbe7c6bd4e6aa0121a26b23: > > boards.cfg: fix a configuration error of ep8248 board (2014-05-13 11:00:01 -0500) > > ---------------------------------------------------------------- > Alexander Graf (4): > PPC 85xx QEMU: Always assume 1 core > PPC 85xx QEMU: Don't use HID1 > powerpc/mpc85xx: Update TLB CAMs in relocated mode > PPC 85xx QEMU: Make a generic board file > > Aneesh Bansal (2): > powerpc/mpc85xx: SECURE BOOT- secure boot target for t1040rdb > powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T2080RDB > > Chunhe Lan (1): > powerpc/85xx: Add T4240RDB board support > > Masahiro Yamada (1): > boards.cfg: fix a configuration error of ep8248 board > > Shaohui Xie (1): > powerpc/fman/memac: use default MDIO_HOLD value > > Shaveta Leekha (2): > board/freescale/common: ZM7300 driver > board/b4qds: VID support > > Shengzhou Liu (2): > powerpc/t208x: enable errata A006261, A006593, A006379 > powerpc/85xx: add T4080 SoC support > > Stefan Bigler (2): > kmp204x: Add support for the unit LEDs > kmp204x: handle dip-switch for factory settings > > Valentin Longchamp (6): > kmp204x: selftest/factory test pin support > kmp204x: update the CONFIG_PRAM and CONFIG_KM_RESERVED_PRAM defines > kmp204x: complete the reset sequence and PRST configuration > kmp204x: update the RCW > kmp204x: add workaround for A-004849 > kmp204x: enable the errata command > > York Sun (6): > powerpc/mpc8572ds: Increase u-boot size to 768KB > powerpc/mpc85xx: Ignore FDT pointer for non-QEMU in cpu_init_early_f() > powerpc/freescale: Change the return value of mac_read_from_eeprom() > powerpc/mpc85xx: Fix boot_flag for calling board_init_f() > powerpc/mpc86xx: Fix boot_flag for calling board_init_f() > powerpc/freescale: Convert selected boards to generic board architecture > > Zhao Qiang (1): > qe: disable qe when qe-ucode fails to be uploaded for "deep sleep" > > arch/powerpc/cpu/mpc85xx/Makefile | 2 + > arch/powerpc/cpu/mpc85xx/cpu.c | 24 + > arch/powerpc/cpu/mpc85xx/cpu_init.c | 17 +- > arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 2 + > arch/powerpc/cpu/mpc85xx/speed.c | 3 +- > arch/powerpc/cpu/mpc85xx/spl_minimal.c | 4 +- > arch/powerpc/cpu/mpc85xx/start.S | 4 +- > arch/powerpc/cpu/mpc85xx/t4240_ids.c | 2 + > arch/powerpc/cpu/mpc85xx/t4240_serdes.c | 2 +- > arch/powerpc/cpu/mpc86xx/start.S | 1 + > arch/powerpc/cpu/mpc8xxx/cpu.c | 5 +- > arch/powerpc/include/asm/config_mpc85xx.h | 19 +- > arch/powerpc/include/asm/fsl_errata.h | 5 + > arch/powerpc/include/asm/fsl_secure_boot.h | 3 +- > arch/powerpc/include/asm/immap_85xx.h | 6 +- > arch/powerpc/include/asm/processor.h | 1 + > board/freescale/b4860qds/b4860qds.c | 240 +++++++++ > board/freescale/common/Makefile | 1 + > board/freescale/common/sys_eeprom.c | 6 +- > board/freescale/common/zm7300.c | 235 +++++++++ > board/freescale/common/zm7300.h | 22 + > board/freescale/qemu-ppce500/qemu-ppce500.c | 20 + > board/freescale/t4rdb/Makefile | 12 + > board/freescale/t4rdb/ddr.c | 118 +++++ > board/freescale/t4rdb/ddr.h | 78 +++ > board/freescale/t4rdb/eth.c | 146 ++++++ > board/freescale/t4rdb/law.c | 28 + > board/freescale/t4rdb/pci.c | 23 + > board/freescale/t4rdb/t4240rdb.c | 125 +++++ > board/freescale/t4rdb/t4_pbi.cfg | 31 ++ > board/freescale/t4rdb/t4_rcw.cfg | 7 + > board/freescale/t4rdb/t4rdb.h | 18 + > board/freescale/t4rdb/tlb.c | 111 ++++ > board/keymile/kmp204x/kmp204x.c | 75 ++- > board/keymile/kmp204x/kmp204x.h | 3 + > board/keymile/kmp204x/pbi.cfg | 43 +- > board/keymile/kmp204x/pci.c | 17 +- > board/keymile/kmp204x/qrio.c | 31 +- > board/keymile/kmp204x/rcw_kmp204x.cfg | 2 +- > boards.cfg | 7 +- > drivers/mmc/fsl_esdhc.c | 2 +- > drivers/net/fm/Makefile | 1 + > drivers/net/fm/memac_phy.c | 8 +- > drivers/qe/qe.c | 9 +- > include/common.h | 5 +- > include/configs/B4860QDS.h | 14 + > include/configs/MPC8536DS.h | 2 + > include/configs/MPC8572DS.h | 5 +- > include/configs/MPC8641HPCN.h | 3 + > include/configs/T208xRDB.h | 1 + > include/configs/T4240RDB.h | 752 +++++++++++++++++++++++++++ > include/configs/corenet_ds.h | 3 + > include/configs/km/kmp204x-common.h | 17 +- > include/configs/p1_p2_rdb_pc.h | 3 + > include/configs/qemu-ppce500.h | 1 + > include/configs/t4qds.h | 2 + > 56 files changed, 2257 insertions(+), 70 deletions(-) > create mode 100644 board/freescale/common/zm7300.c > create mode 100644 board/freescale/common/zm7300.h > create mode 100644 board/freescale/t4rdb/Makefile > create mode 100644 board/freescale/t4rdb/ddr.c > create mode 100644 board/freescale/t4rdb/ddr.h > create mode 100644 board/freescale/t4rdb/eth.c > create mode 100644 board/freescale/t4rdb/law.c > create mode 100644 board/freescale/t4rdb/pci.c > create mode 100644 board/freescale/t4rdb/t4240rdb.c > create mode 100644 board/freescale/t4rdb/t4_pbi.cfg > create mode 100644 board/freescale/t4rdb/t4_rcw.cfg > create mode 100644 board/freescale/t4rdb/t4rdb.h > create mode 100644 board/freescale/t4rdb/tlb.c > create mode 100644 include/configs/T4240RDB.h > > Thanks, > > York > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot >