[U-Boot] Support for Tegra Jetson TK1

[U-Boot] Support for Tegra Jetson TK1

[Hamza Farooq]

Hello,

does the current u-boot for Tegra branch fully support Jetson TK1 board?
The recent commits somehow look incomplete (I was not able to find
RAM/Flash configuration). If it is the case, I'll be thankful if I could be
pointed in the right direction. It is obvious that I am not very
experienced with uboot but I am planning to learn/develop it for my Master
thesis.

PS: This is my first post ever in a mailing list. In case I am doing
something wrong, please point me to the right direction.

Thank you all for your patience

Regards,
Hamza Farooq

[U-Boot] Support for Tegra Jetson TK1

[Stephen Warren]

On 05/13/2014 06:06 AM, Hamza Farooq wrote:
> Hello,
> 
> does the current u-boot for Tegra branch fully support Jetson TK1 board?

Yes, I believe that what's in u-boot.git branch master should be enough
to boot the board. I've sent various patches since then to clean up the
pinmux configuration etc., but I don't think they're required for U-Boot
to work.

> The recent commits somehow look incomplete (I was not able to find
> RAM/Flash configuration).

I'm not sure what you mean by "RAM/Flash configuration". Anyway, it's
likely that the following links will be useful:

Background information on the Tegra boot process, flashing tools, etc.:
http://http.download.nvidia.com/tegra-public-appnotes/

The simplest way to flash a Tegra device for mainline usage:
https://github.com/NVIDIA/tegra-uboot-flasher-scripts
(See README-developer.txt to get the source and build it, then
README-user.txt to run it)

I hope that answers all your questions. Let me know if you have more.