public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Josh Wu <josh.wu@atmel.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] at91: move CONFIG_AT91FAMILY from board config file to hardware.h
Date: Mon, 19 May 2014 17:36:37 +0800	[thread overview]
Message-ID: <5379D0A5.3070602@atmel.com> (raw)
In-Reply-To: <5375E228.5050401@atmel.com>

Hi, Voice

Thanks for the review.

On 5/16/2014 6:02 PM, Bo Shen wrote:
> Hi Josh,
>
> On 05/16/2014 04:52 PM, Josh Wu wrote:
>> Signed-off-by: Josh Wu <josh.wu@atmel.com>
>> ---
>>   arch/arm/include/asm/arch-at91/at91sam9x5.h |    2 ++
>>   include/configs/at91sam9m10g45ek.h          |    1 -
>>   include/configs/at91sam9n12ek.h             |    1 -
>>   include/configs/at91sam9x5ek.h              |    1 -
>>   include/configs/sama5d3_xplained.h          |    1 -
>>   include/configs/sama5d3xek.h                |    1 -
>>   6 files changed, 2 insertions(+), 5 deletions(-)
>
> I think this patch should be split into two patches at least.

sure. that seems better.

> One is move the CONFIG_AT91FAMILY to SoC header (while not hardware.h).
> The other is to remove multiple times definition CONFIG_AT91FAMILY.

in v2, I will also remove CONFIG_AT91FAMILY in other board with use at91 
SoC. like: corvus, cpu9260, ethernut5, vl_ma2sc.

>
> Btw, can you add a little bit words into commit message.

I will add commit message in v2. Thanks.

>
> Best Regards,
> Bo Shen

Best Regards,
Josh Wu
>
>> diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h 
>> b/arch/arm/include/asm/arch-at91/at91sam9x5.h
>> index a471038..36a5cdf 100644
>> --- a/arch/arm/include/asm/arch-at91/at91sam9x5.h
>> +++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h
>> @@ -12,6 +12,8 @@
>>   #ifndef __AT91SAM9X5_H__
>>   #define __AT91SAM9X5_H__
>>
>> +#define CONFIG_AT91FAMILY    /* it's a member of AT91 family */
>> +
>>   /*
>>    * Peripheral identifiers/interrupts.
>>    */
>> diff --git a/include/configs/at91sam9m10g45ek.h 
>> b/include/configs/at91sam9m10g45ek.h
>> index 7a3c9b5..5d5fbe5 100644
>> --- a/include/configs/at91sam9m10g45ek.h
>> +++ b/include/configs/at91sam9m10g45ek.h
>> @@ -22,7 +22,6 @@
>>   #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz 
>> crystal */
>>
>>   #define CONFIG_AT91SAM9M10G45EK
>> -#define CONFIG_AT91FAMILY
>>
>>   #define CONFIG_CMDLINE_TAG        /* enable passing of ATAGs    */
>>   #define CONFIG_SETUP_MEMORY_TAGS
>> diff --git a/include/configs/at91sam9n12ek.h 
>> b/include/configs/at91sam9n12ek.h
>> index e23549d..ebfc26e 100644
>> --- a/include/configs/at91sam9n12ek.h
>> +++ b/include/configs/at91sam9n12ek.h
>> @@ -19,7 +19,6 @@
>>   #define CONFIG_SYS_TEXT_BASE        0x26f00000
>>
>>   #define CONFIG_ARM926EJS
>> -#define CONFIG_AT91FAMILY
>>
>>   /* ARM asynchronous clock */
>>   #define CONFIG_SYS_AT91_SLOW_CLOCK    32768        /* slow clock 
>> xtal */
>> diff --git a/include/configs/at91sam9x5ek.h 
>> b/include/configs/at91sam9x5ek.h
>> index f0a6757..b2dd252 100644
>> --- a/include/configs/at91sam9x5ek.h
>> +++ b/include/configs/at91sam9x5ek.h
>> @@ -18,7 +18,6 @@
>>   #define CONFIG_SYS_AT91_MAIN_CLOCK    12000000    /* 12 MHz crystal */
>>
>>   #define CONFIG_AT91SAM9X5EK
>> -#define CONFIG_AT91FAMILY
>>
>>   #define CONFIG_CMDLINE_TAG        /* enable passing of ATAGs */
>>   #define CONFIG_SETUP_MEMORY_TAGS
>> diff --git a/include/configs/sama5d3_xplained.h 
>> b/include/configs/sama5d3_xplained.h
>> index 41c946d..d7fb850 100644
>> --- a/include/configs/sama5d3_xplained.h
>> +++ b/include/configs/sama5d3_xplained.h
>> @@ -18,7 +18,6 @@
>>   #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
>>   #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz 
>> crystal */
>>
>> -#define CONFIG_AT91FAMILY
>>   #define CONFIG_ARCH_CPU_INIT
>>   #define CONFIG_SKIP_LOWLEVEL_INIT
>>   #define CONFIG_BOARD_EARLY_INIT_F
>> diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
>> index b509c2d..72f0f27 100644
>> --- a/include/configs/sama5d3xek.h
>> +++ b/include/configs/sama5d3xek.h
>> @@ -21,7 +21,6 @@
>>   #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
>>   #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000 /* from 12 MHz 
>> crystal */
>>
>> -#define CONFIG_AT91FAMILY
>>   #define CONFIG_ARCH_CPU_INIT
>>
>>   #ifndef CONFIG_SPL_BUILD
>>
>

      reply	other threads:[~2014-05-19  9:36 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-16  8:52 [U-Boot] [PATCH] at91: move CONFIG_AT91FAMILY from board config file to hardware.h Josh Wu
2014-05-16 10:02 ` Bo Shen
2014-05-19  9:36   ` Josh Wu [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5379D0A5.3070602@atmel.com \
    --to=josh.wu@atmel.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox