From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michal Simek Date: Mon, 26 May 2014 12:27:13 +0200 Subject: [U-Boot] xilinx-u-boot:- NAND: no devices available In-Reply-To: References: Message-ID: <53831701.5020509@monstr.eu> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 05/26/2014 09:35 AM, Uzair Zaidi wrote: > I am trying to run FALCON MODE on zynq-microzed board. I am following > README-falcon.But when i run `nand read 82000000 kernel` command, i get > this error.. > > ****no devices available**** > > > And when i run u-boot it shows.. > ** > > > NAND: zynq_nand_init: Unable detect NAND based on MIO settings ZYNQ > > NAND init failed > > ** > **Here are messages from my u-boot.** > > U-Boot 2014.01 (May 26 2014 - 11:19:45) > > I2C: ready > Memory: ECC disabled > DRAM: 1 GiB > **NAND: zynq_nand_init: Unable detect NAND based on MIO settings There is no NAND driver for zynq in mainline u-boot that's why please use xilinx forums for this type of questions. But based on this message you can simple identify where the problem is. Thanks, Michal -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 263 bytes Desc: OpenPGP digital signature URL: