public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Josh Wu <josh.wu@atmel.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 1/3] net: macb: enable dcache in macb
Date: Tue, 27 May 2014 16:20:15 +0800	[thread overview]
Message-ID: <53844ABF.9020104@atmel.com> (raw)
In-Reply-To: <5383ACF2.8070404@googlemail.com>

Hi, Andreas

On 5/27/2014 5:06 AM, Andreas Bie?mann wrote:
> Hi Josh,
>
> On 19.05.14 13:51, Josh Wu wrote:
>> Add to code to flush the dcache after we writing in DMA buffer.
>> Also we need invalidate the dcache before we check the status in the
>> DMA buffer.
>>
>> Tested in SAMA5D3x-EK with gmac0. Tftp download speed shows in below:
>> 	Disable DCache: 1.1 MiB/s
>> 	Enable DCache: 1.6 MiB/s
>> Increase speed with about 40%.
>>
>> The code should have no impact with the boards which are not
>> enable_dcache().
>> Tested in AT91SAM9M10G45EK.
>>
>> Signed-off-by: Josh Wu <josh.wu@atmel.com>
>> ---
>> v1 -> v2:
>>    no change.
>>
>>   drivers/net/macb.c |   51 +++++++++++++++++++++++++++++++++++++++++++++++++++
>>   1 file changed, 51 insertions(+)
>>
>> diff --git a/drivers/net/macb.c b/drivers/net/macb.c
>> index 781a272..b18f07b 100644
>> --- a/drivers/net/macb.c
>> +++ b/drivers/net/macb.c
>> @@ -194,6 +194,39 @@ int macb_miiphy_write(const char *devname, u8 phy_adr, u8 reg, u16 value)
>>   }
>>   #endif
>>   
>> +#define	IS_RX	1
>> +#define	IS_TX	0
>> +static inline void macb_invalidate_ring_desc(struct macb_device *macb, bool is_rx)
>> +{
>> +	if (is_rx)
>> +		invalidate_dcache_range(macb->rx_ring_dma, macb->rx_ring_dma +
>> +			CONFIG_SYS_MACB_RX_RING_SIZE * sizeof(struct macb_dma_desc));
> these lines produce checkpatch 'line over 80 chars' warnings. Could you
> please check my macb cleanup patch [1] and adopt yours to that one?

No problem.

> Could you please also do a formal review of that patch?

Thanks for the clean up patch. I already add my Reviewed-by in that patch.

>
> Also it could make sens to introduce some MACB_RX_RING_BYTE_SIZE or
> something like this to prevent writing always the multiply by
> sizeof(macb_dma_desc).
> If you could a new version of this patch it could go in as the first
> version was in merge window phase AFAIR. The other two patches in this
> series are ok.

So I will resend a new version of this patch which will rebase on your 
clean up macb patch.
Thanks.

Best Regards,
Josh Wu

>
> Best regards
>
> Andreas Bie?mann
>
> [1] http://patchwork.ozlabs.org/patch/352624/

  reply	other threads:[~2014-05-27  8:20 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-19 11:51 [U-Boot] [PATCH v2 0/3] Enable ICache and DCache for at91 armv7 Soc Josh Wu
2014-05-19 11:51 ` [U-Boot] [PATCH v2 1/3] net: macb: enable dcache in macb Josh Wu
2014-05-20  1:50   ` Bo Shen
2014-05-26 21:06   ` Andreas Bießmann
2014-05-27  8:20     ` Josh Wu [this message]
2014-05-27  8:31     ` [U-Boot] [RESEND][PATCH " Josh Wu
2014-06-14 16:14       ` [U-Boot] [U-Boot,RESEND,v2,1/3] " Andreas Bießmann
2014-05-19 11:51 ` [U-Boot] [PATCH v2 2/3] video: atmel_hlcdfb: enable dcache support Josh Wu
2014-05-19 14:38   ` Anatolij Gustschin
2014-06-14 16:14   ` [U-Boot] [U-Boot,v2,2/3] " Andreas Bießmann
2014-05-19 11:51 ` [U-Boot] [PATCH v2 3/3] ARMv7: at91: enable ICache and DCache Josh Wu
2014-06-14 16:14   ` [U-Boot] [U-Boot,v2,3/3] " Andreas Bießmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=53844ABF.9020104@atmel.com \
    --to=josh.wu@atmel.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox