[U-Boot] [PATCH] fsl/pcie: Change 'no link' to 'undetermined' for pcie endpoint

[Prabhakar Kushwaha <prabhakar@freescale.com>]

Hi Roy,

On 6/13/2014 1:19 AM, Roy Zang wrote:
> Even u-boot boots up, the pcie link may not setup correctly when
> Freescale SOC acts as endpoint.
> So change the link status from 'no link' to 'undetermined' to
> reduce the confusion.
> The link status can check from host side eventually.
>
> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
> ---
>   drivers/pci/fsl_pci_init.c |   10 ++++++++--
>   1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
> index 3a41b0e..231b075 100644
> --- a/drivers/pci/fsl_pci_init.c
> +++ b/drivers/pci/fsl_pci_init.c
> @@ -504,8 +504,14 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info)
>   		}
>   #endif
>   		if (!enabled) {
> -			/* Let the user know there's no PCIe link */
> -			printf("no link, regs @ 0x%lx\n", pci_info->regs);
> +			/* Let the user know there's no PCIe link for root
> +			 * complex. for endpoint, the link may not setup, so
> +			 * print undetermined.
> +			 */
> +			if (fsl_is_pci_agent(hose))
> +				printf("undetermined, regs @ 0x%lx\n", pci_info->regs);

As description of commit message saying "The link status can check from 
host side eventually "
It will be good, if we can also print link status at this point to let 
user know about status of end point.

-prabhakar