From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Tue, 17 Jun 2014 19:58:45 +0200 Subject: [U-Boot] [Patch v2 0/7] Add support for TQMa6 modules In-Reply-To: <53A07DA5.10502@tqsc.de> References: <1402937486-13397-1-git-send-email-list-09_u-boot@tqsc.de> <53A064FC.8030905@denx.de> <53A07DA5.10502@tqsc.de> Message-ID: <53A081D5.5030003@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Markus, On 17/06/2014 19:40, Markus Niebel wrote: >> Is it not an attractive alternative for you ? Instead of having several >> entries in boards.cfg for each variation of your board, you could have >> maybe only one or a couple. > Sure it is - main difference will be boot devices. Right - I am expecting then an entry in boards.cfg for each media, that is able to run on all SOCs. > The env on different boot media > in one image is AFAIK not possible - so at the moment four configs are needed: > SP vs MMC and i.MX6Q/D vs i.MX6S (But this is slightly OT) Well, SP vs MMC is right. But having an entry for all SOCs without having to select one of it at compile time, it is really a plus ;-) Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================