[U-Boot] [PATCH] fsl/pcie: Change 'no link' to 'undetermined' for pcie endpoint

[U-Boot] [PATCH] fsl/pcie: Change 'no link' to 'undetermined' for pcie endpoint

[Roy Zang]

Even u-boot boots up, the pcie link may not setup correctly when
Freescale SOC acts as endpoint.
So change the link status from 'no link' to 'undetermined' to
reduce the confusion.
The link status can check from host side eventually.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
---
 drivers/pci/fsl_pci_init.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
index 3a41b0e..231b075 100644
--- a/drivers/pci/fsl_pci_init.c
+++ b/drivers/pci/fsl_pci_init.c
@@ -504,8 +504,14 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info)
 		}
 #endif
 		if (!enabled) {
-			/* Let the user know there's no PCIe link */
-			printf("no link, regs @ 0x%lx\n", pci_info->regs);
+			/* Let the user know there's no PCIe link for root
+			 * complex. for endpoint, the link may not setup, so
+			 * print undetermined.
+			 */
+			if (fsl_is_pci_agent(hose))
+				printf("undetermined, regs @ 0x%lx\n", pci_info->regs);
+			else
+				printf("no link, regs @ 0x%lx\n", pci_info->regs);
 			hose->last_busno = hose->first_busno;
 			return;
 		}
-- 
1.7.9.5

[U-Boot] [PATCH] fsl/pcie: Change 'no link' to 'undetermined' for pcie endpoint

[Wolfgang Denk]

Dear Roy Zang,

In message <1402602563-26705-1-git-send-email-tie-fei.zang@freescale.com> you wrote:
> Even u-boot boots up, the pcie link may not setup correctly when
> Freescale SOC acts as endpoint.
> So change the link status from 'no link' to 'undetermined' to
> reduce the confusion.
> The link status can check from host side eventually.

Sorry, but can you please explain what exactly you are doing here? I'm
sorry, but I don't understand above text.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Experience is what causes a person to make new  mistakes  instead  of
old ones.

[U-Boot] [PATCH] fsl/pcie: Change 'no link' to 'undetermined' for pcie endpoint

[Roy Zang]

On 06/12/2014 03:56 PM, Wolfgang Denk wrote:
> Dear Roy Zang,
>
> In message <1402602563-26705-1-git-send-email-tie-fei.zang@freescale.com> you wrote:
>> Even u-boot boots up, the pcie link may not setup correctly when
>> Freescale SOC acts as endpoint.
>> So change the link status from 'no link' to 'undetermined' to
>> reduce the confusion.
>> The link status can check from host side eventually.
> Sorry, but can you please explain what exactly you are doing here? I'm
> sorry, but I don't understand above text.
Freescale card acted as PCIe endpoint  plugs into  a X86 host via PCIe slot.
We do see some case that the u-boot prints "no link" when boot up, 
however in X86 Linux, the pcie link sets up correctly. Host Linux boots 
up slow than u-boot.
So if u-boot can capture the link up status, it will print the endpoint 
link up status, or it will print "undetermined" to reduce confusion.
User can still confirm the  link up status from host.
Thank.
Roy

[U-Boot] [PATCH] fsl/pcie: Change 'no link' to 'undetermined' for pcie endpoint

[Prabhakar Kushwaha]

Hi Roy,

On 6/13/2014 1:19 AM, Roy Zang wrote:
> Even u-boot boots up, the pcie link may not setup correctly when
> Freescale SOC acts as endpoint.
> So change the link status from 'no link' to 'undetermined' to
> reduce the confusion.
> The link status can check from host side eventually.
>
> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
> ---
>   drivers/pci/fsl_pci_init.c |   10 ++++++++--
>   1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
> index 3a41b0e..231b075 100644
> --- a/drivers/pci/fsl_pci_init.c
> +++ b/drivers/pci/fsl_pci_init.c
> @@ -504,8 +504,14 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info)
>   		}
>   #endif
>   		if (!enabled) {
> -			/* Let the user know there's no PCIe link */
> -			printf("no link, regs @ 0x%lx\n", pci_info->regs);
> +			/* Let the user know there's no PCIe link for root
> +			 * complex. for endpoint, the link may not setup, so
> +			 * print undetermined.
> +			 */
> +			if (fsl_is_pci_agent(hose))
> +				printf("undetermined, regs @ 0x%lx\n", pci_info->regs);

As description of commit message saying "The link status can check from 
host side eventually "
It will be good, if we can also print link status at this point to let 
user know about status of end point.

-prabhakar

[U-Boot] [PATCH] fsl/pcie: Change 'no link' to 'undetermined' for pcie endpoint

[Roy Zang]

On 06/12/2014 10:22 PM, Prabhakar Kushwaha wrote:
>
> Hi Roy,
>
> On 6/13/2014 1:19 AM, Roy Zang wrote:
>> Even u-boot boots up, the pcie link may not setup correctly when
>> Freescale SOC acts as endpoint.
>> So change the link status from 'no link' to 'undetermined' to
>> reduce the confusion.
>> The link status can check from host side eventually.
>>
>> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
>> ---
>>   drivers/pci/fsl_pci_init.c |   10 ++++++++--
>>   1 file changed, 8 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
>> index 3a41b0e..231b075 100644
>> --- a/drivers/pci/fsl_pci_init.c
>> +++ b/drivers/pci/fsl_pci_init.c
>> @@ -504,8 +504,14 @@ void fsl_pci_init(struct pci_controller *hose, 
>> struct fsl_pci_info *pci_info)
>>           }
>>   #endif
>>           if (!enabled) {
>> -            /* Let the user know there's no PCIe link */
>> -            printf("no link, regs @ 0x%lx\n", pci_info->regs);
>> +            /* Let the user know there's no PCIe link for root
>> +             * complex. for endpoint, the link may not setup, so
>> +             * print undetermined.
>> +             */
>> +            if (fsl_is_pci_agent(hose))
>> +                printf("undetermined, regs @ 0x%lx\n", pci_info->regs);
>
> As description of commit message saying "The link status can check 
> from host side eventually "
> It will be good, if we can also print link status at this point to let 
> user know about status of end point.
>
however, the *no link* status prints by u-boot may not  reflect the 
final link up status. It will cause confusion.
Roy