From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Mon, 23 Jun 2014 12:07:17 +0200 Subject: [U-Boot] [Patch v2 0/7] Add support for TQMa6 modules In-Reply-To: <53A7F8E3.7030006@tqsc.de> References: <1402937486-13397-1-git-send-email-list-09_u-boot@tqsc.de> <53A064FC.8030905@denx.de> <53A07DA5.10502@tqsc.de> <53A081D5.5030003@denx.de> <53A7F8E3.7030006@tqsc.de> Message-ID: <53A7FC55.7000708@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Markus, On 23/06/2014 11:52, Markus Niebel wrote: > Hello Stefano, > > Am 17.06.2014 19:58, schrieb Stefano Babic: >> Hi Markus, >> >> On 17/06/2014 19:40, Markus Niebel wrote: >> >>>> Is it not an attractive alternative for you ? Instead of having several >>>> entries in boards.cfg for each variation of your board, you could have >>>> maybe only one or a couple. >> >>> Sure it is - main difference will be boot devices. >> >> Right - I am expecting then an entry in boards.cfg for each media, that >> is able to run on all SOCs. >> > > Do you mean, accepting the board needs the switch to SPL / single image > support? No, there is no block about it. My suggestion is to evaluate the advantages of such solution. > Or will the current solution - one entry for TQMa6 with MX6Q/D > and one for TQMa6 with i.MX6S - be accepted? As I said, no blocking point. It can still be accepted. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================