From mboxrd@z Thu Jan  1 00:00:00 1970
From: Bo Shen <voice.shen@atmel.com>
Date: Mon, 30 Jun 2014 18:01:39 +0800
Subject: [U-Boot] [PATCH 2/2] ARM: atmel: sama5d3xek: enable NOR flash
 support
In-Reply-To: <00ef01cf9449$6378fa70$2a6aef50$@pont@sdcsystems.com>
References: <1403252161-20526-1-git-send-email-voice.shen@atmel.com>
	<1403252161-20526-3-git-send-email-voice.shen@atmel.com>
	<00ef01cf9449$6378fa70$2a6aef50$@pont@sdcsystems.com>
Message-ID: <53B13583.7040705@atmel.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Hi Andy,

On 06/30/2014 05:55 PM, Andy Pont wrote:
> Hi Bo,
>
>> -/* No NOR flash */
>> +/* NOR flash */
>> +#define CONFIG_CMD_FLASH
>> +
>> +#ifdef CONFIG_CMD_FLASH
>> +#define CONFIG_SYS_FLASH_CFI
>> +#define CONFIG_FLASH_CFI_DRIVER
>> +#define CONFIG_SYS_FLASH_BASE		0x10000000
>> +#define CONFIG_SYS_MAX_FLASH_SECT	0x20000
>> +#define CONFIG_SYS_MAX_FLASH_BANKS	1
>> +#else
>>   #define CONFIG_SYS_NO_FLASH
>> +#endif
>
> The NOR flash device on the SAMA5D3x CPU modules supports hardware sector
> protection and according to the flash datasheet: "All blocks power-up in a
> locked state to protect array data from being altered during power
> transitions".  In order to make your patch set work:
>
> #define CONFIG_SYS_FLASH_PROTECTION
>
> needs adding into the include/configs/sama5d3xek.h file.

Thanks for your information.
I will add it into next version.
Thanks again.

> Andy.
>

Best Regards,
Bo Shen