From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Wed, 09 Jul 2014 15:11:03 +0200 Subject: [U-Boot] [PATCH] mx6: soc: Update the comments of set_ldo_voltage() In-Reply-To: <1402634557-8630-1-git-send-email-festevam@gmail.com> References: <1402634557-8630-1-git-send-email-festevam@gmail.com> Message-ID: <53BD3F67.1080104@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Fabio, On 13/06/2014 06:42, Fabio Estevam wrote: > From: Fabio Estevam > > Commit 3d622b78 (mx6: soc: Introduce set_ldo_voltage()) introduces > set_ldo_voltage() function that can be used to set the voltages > of any of the three LDO regulators controlled by the PMU_REG_CORE register. > > Prior to this commit there was a single set_vddsoc() which only configured the > VDDSOC regulator. > > Update the comments to align with the new set_ldo_voltage() implementation. > > Signed-off-by: Fabio Estevam > --- Applied to u-boot-imx (fix), thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================