* [U-Boot] [PULL]: small fixes from u-boot-imx
@ 2014-07-09 13:19 Stefano Babic
2014-07-09 13:25 ` Tom Rini
0 siblings, 1 reply; 2+ messages in thread
From: Stefano Babic @ 2014-07-09 13:19 UTC (permalink / raw)
To: u-boot
Hi Tom,
please pull from u-boot-imx - hopefully last fixes for the release. Thanks !
The following changes since commit 3f4c01d9f9d38e383f004dcd06c0d5661f2a57e0:
mx25pdk: Remove CONFIG_SYS_GENERIC_BOARD (2014-06-26 10:17:19 +0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to 157f45da91b306d71dbf3a51325352dc11bf16d1:
mx6: soc: Update the comments of set_ldo_voltage() (2014-07-09
15:10:10 +0200)
----------------------------------------------------------------
Andre Renaud (1):
MX6: Correct calculation of PLL_SYS
Fabio Estevam (1):
mx6: soc: Update the comments of set_ldo_voltage()
Lothar Rubusch (2):
ARM: m28evk: Update default environment
ARM: m53evk: Update default environment
Marek Vasut (4):
ARM: m28evk: add needed commands and options
ARM: m28evk: Adjust mtdparts
ARM: m53evk: add needed commands and options
ARM: m53evk: Adjust mtdparts settings
arch/arm/cpu/armv7/mx6/clock.c | 2 +-
arch/arm/cpu/armv7/mx6/soc.c | 5 +-
include/configs/m28evk.h | 116
++++++++++++++++++++++++++++++++++-----
include/configs/m53evk.h | 122
+++++++++++++++++++++++++++++++++++++----
4 files changed, 215 insertions(+), 30 deletions(-)
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] [PULL]: small fixes from u-boot-imx
2014-07-09 13:19 [U-Boot] [PULL]: small fixes from u-boot-imx Stefano Babic
@ 2014-07-09 13:25 ` Tom Rini
0 siblings, 0 replies; 2+ messages in thread
From: Tom Rini @ 2014-07-09 13:25 UTC (permalink / raw)
To: u-boot
On Wed, Jul 09, 2014 at 03:19:19PM +0200, Stefano Babic wrote:
> Hi Tom,
>
> please pull from u-boot-imx - hopefully last fixes for the release. Thanks !
>
> The following changes since commit 3f4c01d9f9d38e383f004dcd06c0d5661f2a57e0:
>
> mx25pdk: Remove CONFIG_SYS_GENERIC_BOARD (2014-06-26 10:17:19 +0200)
>
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
>
> for you to fetch changes up to 157f45da91b306d71dbf3a51325352dc11bf16d1:
>
> mx6: soc: Update the comments of set_ldo_voltage() (2014-07-09
> 15:10:10 +0200)
>
> ----------------------------------------------------------------
> Andre Renaud (1):
> MX6: Correct calculation of PLL_SYS
>
> Fabio Estevam (1):
> mx6: soc: Update the comments of set_ldo_voltage()
>
> Lothar Rubusch (2):
> ARM: m28evk: Update default environment
> ARM: m53evk: Update default environment
>
> Marek Vasut (4):
> ARM: m28evk: add needed commands and options
> ARM: m28evk: Adjust mtdparts
> ARM: m53evk: add needed commands and options
> ARM: m53evk: Adjust mtdparts settings
>
> arch/arm/cpu/armv7/mx6/clock.c | 2 +-
> arch/arm/cpu/armv7/mx6/soc.c | 5 +-
> include/configs/m28evk.h | 116
> ++++++++++++++++++++++++++++++++++-----
> include/configs/m53evk.h | 122
> +++++++++++++++++++++++++++++++++++++----
> 4 files changed, 215 insertions(+), 30 deletions(-)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140709/88f0d5a9/attachment.pgp>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-07-09 13:25 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-07-09 13:19 [U-Boot] [PULL]: small fixes from u-boot-imx Stefano Babic
2014-07-09 13:25 ` Tom Rini
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox