[U-Boot] [PATCH] i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10

[Stefano Babic <sbabic@denx.de>]

Hi Eric, hi Otavio,

On 09/07/2014 21:40, Otavio Salvador wrote:
> On Wed, Jul 9, 2014 at 4:27 PM, Eric Nelson
> <eric.nelson@boundarydevices.com> wrote:
>> The pad settings for DISP0_DATA02 and DISP0_DAT10 were not
>> set in the same way as DISP0_DAT00-23, causing much flicker
>> in parallel RGB displays on Dual-Lite and Solo processors.
>>
>> These settings now match the i.MX6 Dual and Quad core versions.
>>
>> Note that this fixes a regression in commit b47abc3 and that
>> this is the second time we've had a regression on these two
>> pads (See commit e654ddf).
>>
>> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
> 
> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
> 
> Stephano, can it be included in the upcoming release?

I will try: I merge it and I send a PR to Tom, as I did yesterday.

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================