From: Stefano Babic <sbabic@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/2] mx6: Remove duplication of iomuxc structure
Date: Fri, 11 Jul 2014 09:41:45 +0200 [thread overview]
Message-ID: <53BF9539.4060703@denx.de> (raw)
In-Reply-To: <1404939595-16151-1-git-send-email-festevam@gmail.com>
Hi Fabio,
On 09/07/2014 22:59, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> There is no need to keep iomuxc_base_regs structure as it serves the exact same
> purpose of the iomuxc structure, which is to provide access to the GPR
> registers.
>
> The additional fields of iomuxc_base_regs are not used. Other advantage of
> 'iomuxc' is that it has a shorter name and the variable declarations can fit
> into a single line.
>
> So remove iomuxc_base_regs structure and use iomuxc instead.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> This applies against 'next' branch.
>
> arch/arm/imx-common/sata.c | 3 +--
> arch/arm/include/asm/arch-mx6/imx-regs.h | 9 ---------
> board/boundary/nitrogen6x/nitrogen6x.c | 3 +--
> board/freescale/mx6slevk/mx6slevk.c | 3 +--
> board/gateworks/gw_ventana/gw_ventana.c | 3 +--
> board/solidrun/hummingboard/hummingboard.c | 3 +--
> 6 files changed, 5 insertions(+), 19 deletions(-)
>
> diff --git a/arch/arm/imx-common/sata.c b/arch/arm/imx-common/sata.c
> index c10dd28..d174a46 100644
> --- a/arch/arm/imx-common/sata.c
> +++ b/arch/arm/imx-common/sata.c
> @@ -12,8 +12,7 @@
>
> int setup_sata(void)
> {
> - struct iomuxc_base_regs *const iomuxc_regs
> - = (struct iomuxc_base_regs *)IOMUXC_BASE_ADDR;
> + struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
> int ret;
>
> if (!is_cpu_type(MXC_CPU_MX6Q) && !is_cpu_type(MXC_CPU_MX6D))
> diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
> index df87123..782d9c4 100644
> --- a/arch/arm/include/asm/arch-mx6/imx-regs.h
> +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
> @@ -764,15 +764,6 @@ struct anatop_regs {
> #define ANATOP_PFD_CLKGATE_SHIFT(n) (7+((n)*8))
> #define ANATOP_PFD_CLKGATE_MASK(n) (1<<ANATOP_PFD_CLKGATE_SHIFT(n))
>
> -struct iomuxc_base_regs {
> - u32 gpr[14]; /* 0x000 */
> - u32 obsrv[5]; /* 0x038 */
> - u32 swmux_ctl[197]; /* 0x04c */
> - u32 swpad_ctl[250]; /* 0x360 */
> - u32 swgrp[26]; /* 0x748 */
> - u32 daisy[104]; /* 0x7b0..94c */
> -};
> -
> struct wdog_regs {
> u16 wcr; /* Control */
> u16 wsr; /* Service */
> diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
> index 84294db..60a09f4 100644
> --- a/board/boundary/nitrogen6x/nitrogen6x.c
> +++ b/board/boundary/nitrogen6x/nitrogen6x.c
> @@ -644,8 +644,7 @@ int overwrite_console(void)
>
> int board_init(void)
> {
> - struct iomuxc_base_regs *const iomuxc_regs
> - = (struct iomuxc_base_regs *)IOMUXC_BASE_ADDR;
> + struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
>
> clrsetbits_le32(&iomuxc_regs->gpr[1],
> IOMUXC_GPR1_OTG_ID_MASK,
> diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
> index d2b64cc..a990b4c 100644
> --- a/board/freescale/mx6slevk/mx6slevk.c
> +++ b/board/freescale/mx6slevk/mx6slevk.c
> @@ -130,8 +130,7 @@ int board_eth_init(bd_t *bis)
>
> static int setup_fec(void)
> {
> - struct iomuxc_base_regs *iomuxc_regs =
> - (struct iomuxc_base_regs *)IOMUXC_BASE_ADDR;
> + struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
> int ret;
>
> /* clear gpr1[14], gpr1[18:17] to select anatop clock */
> diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
> index 9d2651f..9967f80 100644
> --- a/board/gateworks/gw_ventana/gw_ventana.c
> +++ b/board/gateworks/gw_ventana/gw_ventana.c
> @@ -1122,8 +1122,7 @@ int dram_init(void)
>
> int board_init(void)
> {
> - struct iomuxc_base_regs *const iomuxc_regs
> - = (struct iomuxc_base_regs *)IOMUXC_BASE_ADDR;
> + struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
>
> clrsetbits_le32(&iomuxc_regs->gpr[1],
> IOMUXC_GPR1_OTG_ID_MASK,
> diff --git a/board/solidrun/hummingboard/hummingboard.c b/board/solidrun/hummingboard/hummingboard.c
> index 2e2fb2a..6d204b3 100644
> --- a/board/solidrun/hummingboard/hummingboard.c
> +++ b/board/solidrun/hummingboard/hummingboard.c
> @@ -144,8 +144,7 @@ int board_phy_config(struct phy_device *phydev)
>
> int board_eth_init(bd_t *bis)
> {
> - struct iomuxc_base_regs *const iomuxc_regs =
> - (struct iomuxc_base_regs *)IOMUXC_BASE_ADDR;
> + struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
>
> int ret = enable_fec_anatop_clock(ENET_25MHz);
> if (ret)
>
Good cleanup, thanks !
Acked-by: Stefano Babic <sbabic@denx.de>
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
next prev parent reply other threads:[~2014-07-11 7:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-09 20:59 [U-Boot] [PATCH 1/2] mx6: Remove duplication of iomuxc structure Fabio Estevam
2014-07-09 20:59 ` [U-Boot] [PATCH 2/2] mx6: Adjust the GPR offset for mx6solox Fabio Estevam
2014-07-11 7:42 ` Stefano Babic
2014-07-23 10:36 ` Stefano Babic
2014-07-11 7:41 ` Stefano Babic [this message]
2014-07-23 10:36 ` [U-Boot] [PATCH 1/2] mx6: Remove duplication of iomuxc structure Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53BF9539.4060703@denx.de \
--to=sbabic@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox