[U-Boot] [PATCH v2 3/5] i.MX6: define struct pwm_regs and PWMCR_* defines

[Heiko Schocher <hs@denx.de>]

Hello Stefano,

Am 15.07.2014 10:12, schrieb Stefano Babic:
> Hi Heiko,
>
> On 12/07/2014 06:10, Heiko Schocher wrote:
>> add defines for pwm modul found on imx6.
>>
>> Signed-off-by: Heiko Schocher<hs@denx.de>
>> Cc: Stefano Babic<sbabic@denx.de>
>>
>> ---
>> - changes for v2:
>>    - new
>>
>>   arch/arm/include/asm/arch-mx6/imx-regs.h | 16 ++++++++++++++++
>>   1 file changed, 16 insertions(+)
>>
>> diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
>> index 7193118..2135051 100644
>> --- a/arch/arm/include/asm/arch-mx6/imx-regs.h
>> +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
>> @@ -669,5 +669,21 @@ struct wdog_regs {
>>   	u16	wmcr;	/* Miscellaneous Control */
>>   };
>>
>> +#define PWMCR_PRESCALER(x)	(((x - 1)&  0xFFF)<<  4)
>> +#define PWMCR_DOZEEN		(1<<  24)
>> +#define PWMCR_WAITEN		(1<<  23)
>> +#define PWMCR_DBGEN		(1<<  22)
>> +#define PWMCR_CLKSRC_IPG_HIGH	(2<<  16)
>> +#define PWMCR_CLKSRC_IPG	(1<<  16)
>> +#define PWMCR_EN		(1<<  0)
>> +
>> +struct pwm_regs {
>> +	u32	cr;
>> +	u32	sr;
>> +	u32	ir;
>> +	u32	sar;
>> +	u32	pr;
>> +	u32	cnr;
>> +};
>>   #endif /* __ASSEMBLER__*/
>>   #endif /* __ASM_ARCH_MX6_IMX_REGS_H__ */
>>
>
> I see. What do you mind to add a little effort and move the setup of the
> PWM from the aristaneos board to a PWM driver ? I see there is not (yet)
> such a driver, but why not ?

Yes, I can do that ... Hmm, where do you think is a good place for this
driver?

> What we need are only three simple functions exactly as in Linux kernel:
> pwm_enable() pwm_disable(), pwm_config(duty, period)
>
> This becomes more general and can be reused by other i.MX boards.

bye,
Heiko
-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany