[U-Boot] [PATCH] sun7i: Add bananapi board

[Hannes Petermaier <hannes@petermaier.org>]

Hello Hans,

i tried to test your patch, but unfortunately i cannot apply it to a 
freshly cloned u-boot:

Applying: sun7i: Add bananapi board
error: patch failed: board/sunxi/Makefile:19
error: board/sunxi/Makefile: patch does not apply
error: patch failed: boards.cfg:386
error: boards.cfg: patch does not apply
Patch failed at 0001 sun7i: Add bananapi board
The copy of the patch that failed is found in:
    /home/petermaierh/work/u-boot/.git/rebase-apply/patch
When you have resolved this problem, run "git am --resolved".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".


any ideas ?

best regards,
hannes

On 2014-07-29 18:57, Hans de Goede wrote:
> The Banana Pi is an A20 based development board using Raspberry Pi compatible
> IO headers. It comes with 1 GB RAM, 1 Gb ethernet, 2x USB host, sata, hdmi
> and stereo audio out + various expenansion headers:
>
> http://www.bananapi.org/
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>   board/sunxi/Makefile        |  1 +
>   board/sunxi/dram_bananapi.c | 31 +++++++++++++++++++++++++++++++
>   boards.cfg                  |  1 +
>   3 files changed, 33 insertions(+)
>   create mode 100644 board/sunxi/dram_bananapi.c
>
> diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile
> index 3fc7513..cf001e7 100644
> --- a/board/sunxi/Makefile
> +++ b/board/sunxi/Makefile
> @@ -19,6 +19,7 @@ obj-$(CONFIG_A20_OLINUXINO_M)	+= dram_sun7i_384_1024_iow16.o
>   # This is not a typo, uses the same mem settings as the a10s-olinuxino-m
>   obj-$(CONFIG_AUXTEK_T004)	+= dram_a10s_olinuxino_m.o
>   obj-$(CONFIG_BA10_TV_BOX)	+= dram_sun4i_384_1024_iow8.o
> +obj-$(CONFIG_BANANAPI)		+= dram_bananapi.o
>   obj-$(CONFIG_CUBIEBOARD)	+= dram_cubieboard.o
>   obj-$(CONFIG_CUBIEBOARD2)	+= dram_cubieboard2.o
>   obj-$(CONFIG_CUBIETRUCK)	+= dram_cubietruck.o
> diff --git a/board/sunxi/dram_bananapi.c b/board/sunxi/dram_bananapi.c
> new file mode 100644
> index 0000000..0ed7943
> --- /dev/null
> +++ b/board/sunxi/dram_bananapi.c
> @@ -0,0 +1,31 @@
> +/* this file is generated, don't edit it yourself */
> +
> +#include <common.h>
> +#include <asm/arch/dram.h>
> +
> +static struct dram_para dram_para = {
> +	.clock = 432,
> +	.type = 3,
> +	.rank_num = 1,
> +	.density = 4096,
> +	.io_width = 16,
> +	.bus_width = 32,
> +	.cas = 9,
> +	.zq = 0x7f,
> +	.odt_en = 0,
> +	.size = 1024,
> +	.tpr0 = 0x42d899b7,
> +	.tpr1 = 0xa090,
> +	.tpr2 = 0x22a00,
> +	.tpr3 = 0x0,
> +	.tpr4 = 0x1,
> +	.tpr5 = 0x0,
> +	.emr1 = 0x4,
> +	.emr2 = 0x10,
> +	.emr3 = 0x0,
> +};
> +
> +unsigned long sunxi_dram_init(void)
> +{
> +	return dramc_init(&dram_para);
> +}
> diff --git a/boards.cfg b/boards.cfg
> index a9b6106..eeba90a 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -386,6 +386,7 @@ Active  arm         armv7          sunxi       -               sunxi
>   Active  arm         armv7          sunxi       -               sunxi               A20-OLinuXino_MICRO                   sun7i:A20_OLINUXINO_M,SPL,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI                                              Hans de Goede <hdegoede@redhat.com>
>   Active  arm         armv7          sunxi       -               sunxi               Auxtek-T004                           sun5i:AUXTEK_T004,SPL,AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13)                                                    Hans de Goede <hdegoede@redhat.com>
>   Active  arm         armv7          sunxi       -               sunxi               ba10_tv_box                           sun4i:BA10_TV_BOX,SPL,AXP209_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS1_GPIO=SUNXI_GPH(12)                                         Hans de Goede <hdegoede@redhat.com>
> +Active  arm         armv7          sunxi       -               sunxi               Bananapi                              sun7i:BANANAPI,SPL,AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI                                               Hans de Goede <hdegoede@redhat.com>
>   Active  arm         armv7          sunxi       -               sunxi               Cubieboard                            sun4i:CUBIEBOARD,SPL,AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI                                                   Hans de Goede <hdegoede@redhat.com>
>   Active  arm         armv7          sunxi       -               sunxi               Cubieboard2                           sun7i:CUBIEBOARD2,SPL,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI                                                  Ian Campbell <ijc@hellion.org.uk>:Hans de Goede <hdegoede@redhat.com>
>   Active  arm         armv7          sunxi       -               sunxi               Cubieboard2_FEL                       sun7i:CUBIEBOARD2,SPL_FEL,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI                                              Ian Campbell <ijc@hellion.org.uk>:Hans de Goede <hdegoede@redhat.com>