* [U-Boot] [PATCH] sun7i: Add bananapi board
@ 2014-07-29 16:57 Hans de Goede
2014-07-29 17:39 ` Ian Campbell
2014-07-29 18:57 ` Hannes Petermaier
0 siblings, 2 replies; 5+ messages in thread
From: Hans de Goede @ 2014-07-29 16:57 UTC (permalink / raw)
To: u-boot
The Banana Pi is an A20 based development board using Raspberry Pi compatible
IO headers. It comes with 1 GB RAM, 1 Gb ethernet, 2x USB host, sata, hdmi
and stereo audio out + various expenansion headers:
http://www.bananapi.org/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
board/sunxi/Makefile | 1 +
board/sunxi/dram_bananapi.c | 31 +++++++++++++++++++++++++++++++
boards.cfg | 1 +
3 files changed, 33 insertions(+)
create mode 100644 board/sunxi/dram_bananapi.c
diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile
index 3fc7513..cf001e7 100644
--- a/board/sunxi/Makefile
+++ b/board/sunxi/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_A20_OLINUXINO_M) += dram_sun7i_384_1024_iow16.o
# This is not a typo, uses the same mem settings as the a10s-olinuxino-m
obj-$(CONFIG_AUXTEK_T004) += dram_a10s_olinuxino_m.o
obj-$(CONFIG_BA10_TV_BOX) += dram_sun4i_384_1024_iow8.o
+obj-$(CONFIG_BANANAPI) += dram_bananapi.o
obj-$(CONFIG_CUBIEBOARD) += dram_cubieboard.o
obj-$(CONFIG_CUBIEBOARD2) += dram_cubieboard2.o
obj-$(CONFIG_CUBIETRUCK) += dram_cubietruck.o
diff --git a/board/sunxi/dram_bananapi.c b/board/sunxi/dram_bananapi.c
new file mode 100644
index 0000000..0ed7943
--- /dev/null
+++ b/board/sunxi/dram_bananapi.c
@@ -0,0 +1,31 @@
+/* this file is generated, don't edit it yourself */
+
+#include <common.h>
+#include <asm/arch/dram.h>
+
+static struct dram_para dram_para = {
+ .clock = 432,
+ .type = 3,
+ .rank_num = 1,
+ .density = 4096,
+ .io_width = 16,
+ .bus_width = 32,
+ .cas = 9,
+ .zq = 0x7f,
+ .odt_en = 0,
+ .size = 1024,
+ .tpr0 = 0x42d899b7,
+ .tpr1 = 0xa090,
+ .tpr2 = 0x22a00,
+ .tpr3 = 0x0,
+ .tpr4 = 0x1,
+ .tpr5 = 0x0,
+ .emr1 = 0x4,
+ .emr2 = 0x10,
+ .emr3 = 0x0,
+};
+
+unsigned long sunxi_dram_init(void)
+{
+ return dramc_init(&dram_para);
+}
diff --git a/boards.cfg b/boards.cfg
index a9b6106..eeba90a 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -386,6 +386,7 @@ Active arm armv7 sunxi - sunxi
Active arm armv7 sunxi - sunxi A20-OLinuXino_MICRO sun7i:A20_OLINUXINO_M,SPL,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI Hans de Goede <hdegoede@redhat.com>
Active arm armv7 sunxi - sunxi Auxtek-T004 sun5i:AUXTEK_T004,SPL,AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13) Hans de Goede <hdegoede@redhat.com>
Active arm armv7 sunxi - sunxi ba10_tv_box sun4i:BA10_TV_BOX,SPL,AXP209_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS1_GPIO=SUNXI_GPH(12) Hans de Goede <hdegoede@redhat.com>
+Active arm armv7 sunxi - sunxi Bananapi sun7i:BANANAPI,SPL,AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI Hans de Goede <hdegoede@redhat.com>
Active arm armv7 sunxi - sunxi Cubieboard sun4i:CUBIEBOARD,SPL,AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI Hans de Goede <hdegoede@redhat.com>
Active arm armv7 sunxi - sunxi Cubieboard2 sun7i:CUBIEBOARD2,SPL,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI Ian Campbell <ijc@hellion.org.uk>:Hans de Goede <hdegoede@redhat.com>
Active arm armv7 sunxi - sunxi Cubieboard2_FEL sun7i:CUBIEBOARD2,SPL_FEL,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI Ian Campbell <ijc@hellion.org.uk>:Hans de Goede <hdegoede@redhat.com>
--
2.0.0
^ permalink raw reply related [flat|nested] 5+ messages in thread* [U-Boot] [PATCH] sun7i: Add bananapi board
2014-07-29 16:57 [U-Boot] [PATCH] sun7i: Add bananapi board Hans de Goede
@ 2014-07-29 17:39 ` Ian Campbell
2014-07-29 18:57 ` Hannes Petermaier
1 sibling, 0 replies; 5+ messages in thread
From: Ian Campbell @ 2014-07-29 17:39 UTC (permalink / raw)
To: u-boot
On Tue, 2014-07-29 at 18:57 +0200, Hans de Goede wrote:
> The Banana Pi is an A20 based development board using Raspberry Pi compatible
> IO headers. It comes with 1 GB RAM, 1 Gb ethernet, 2x USB host, sata, hdmi
> and stereo audio out + various expenansion headers:
"expansion"
> http://www.bananapi.org/
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH] sun7i: Add bananapi board
2014-07-29 16:57 [U-Boot] [PATCH] sun7i: Add bananapi board Hans de Goede
2014-07-29 17:39 ` Ian Campbell
@ 2014-07-29 18:57 ` Hannes Petermaier
2014-07-29 19:00 ` Ian Campbell
1 sibling, 1 reply; 5+ messages in thread
From: Hannes Petermaier @ 2014-07-29 18:57 UTC (permalink / raw)
To: u-boot
Hello Hans,
i tried to test your patch, but unfortunately i cannot apply it to a
freshly cloned u-boot:
Applying: sun7i: Add bananapi board
error: patch failed: board/sunxi/Makefile:19
error: board/sunxi/Makefile: patch does not apply
error: patch failed: boards.cfg:386
error: boards.cfg: patch does not apply
Patch failed at 0001 sun7i: Add bananapi board
The copy of the patch that failed is found in:
/home/petermaierh/work/u-boot/.git/rebase-apply/patch
When you have resolved this problem, run "git am --resolved".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".
any ideas ?
best regards,
hannes
On 2014-07-29 18:57, Hans de Goede wrote:
> The Banana Pi is an A20 based development board using Raspberry Pi compatible
> IO headers. It comes with 1 GB RAM, 1 Gb ethernet, 2x USB host, sata, hdmi
> and stereo audio out + various expenansion headers:
>
> http://www.bananapi.org/
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> board/sunxi/Makefile | 1 +
> board/sunxi/dram_bananapi.c | 31 +++++++++++++++++++++++++++++++
> boards.cfg | 1 +
> 3 files changed, 33 insertions(+)
> create mode 100644 board/sunxi/dram_bananapi.c
>
> diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile
> index 3fc7513..cf001e7 100644
> --- a/board/sunxi/Makefile
> +++ b/board/sunxi/Makefile
> @@ -19,6 +19,7 @@ obj-$(CONFIG_A20_OLINUXINO_M) += dram_sun7i_384_1024_iow16.o
> # This is not a typo, uses the same mem settings as the a10s-olinuxino-m
> obj-$(CONFIG_AUXTEK_T004) += dram_a10s_olinuxino_m.o
> obj-$(CONFIG_BA10_TV_BOX) += dram_sun4i_384_1024_iow8.o
> +obj-$(CONFIG_BANANAPI) += dram_bananapi.o
> obj-$(CONFIG_CUBIEBOARD) += dram_cubieboard.o
> obj-$(CONFIG_CUBIEBOARD2) += dram_cubieboard2.o
> obj-$(CONFIG_CUBIETRUCK) += dram_cubietruck.o
> diff --git a/board/sunxi/dram_bananapi.c b/board/sunxi/dram_bananapi.c
> new file mode 100644
> index 0000000..0ed7943
> --- /dev/null
> +++ b/board/sunxi/dram_bananapi.c
> @@ -0,0 +1,31 @@
> +/* this file is generated, don't edit it yourself */
> +
> +#include <common.h>
> +#include <asm/arch/dram.h>
> +
> +static struct dram_para dram_para = {
> + .clock = 432,
> + .type = 3,
> + .rank_num = 1,
> + .density = 4096,
> + .io_width = 16,
> + .bus_width = 32,
> + .cas = 9,
> + .zq = 0x7f,
> + .odt_en = 0,
> + .size = 1024,
> + .tpr0 = 0x42d899b7,
> + .tpr1 = 0xa090,
> + .tpr2 = 0x22a00,
> + .tpr3 = 0x0,
> + .tpr4 = 0x1,
> + .tpr5 = 0x0,
> + .emr1 = 0x4,
> + .emr2 = 0x10,
> + .emr3 = 0x0,
> +};
> +
> +unsigned long sunxi_dram_init(void)
> +{
> + return dramc_init(&dram_para);
> +}
> diff --git a/boards.cfg b/boards.cfg
> index a9b6106..eeba90a 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -386,6 +386,7 @@ Active arm armv7 sunxi - sunxi
> Active arm armv7 sunxi - sunxi A20-OLinuXino_MICRO sun7i:A20_OLINUXINO_M,SPL,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI Hans de Goede <hdegoede@redhat.com>
> Active arm armv7 sunxi - sunxi Auxtek-T004 sun5i:AUXTEK_T004,SPL,AXP152_POWER,USB_EHCI,SUNXI_USB_VBUS0_GPIO=SUNXI_GPG(13) Hans de Goede <hdegoede@redhat.com>
> Active arm armv7 sunxi - sunxi ba10_tv_box sun4i:BA10_TV_BOX,SPL,AXP209_POWER,SUNXI_EMAC,USB_EHCI,SUNXI_USB_VBUS1_GPIO=SUNXI_GPH(12) Hans de Goede <hdegoede@redhat.com>
> +Active arm armv7 sunxi - sunxi Bananapi sun7i:BANANAPI,SPL,AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI Hans de Goede <hdegoede@redhat.com>
> Active arm armv7 sunxi - sunxi Cubieboard sun4i:CUBIEBOARD,SPL,AXP209_POWER,SUNXI_EMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI Hans de Goede <hdegoede@redhat.com>
> Active arm armv7 sunxi - sunxi Cubieboard2 sun7i:CUBIEBOARD2,SPL,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI Ian Campbell <ijc@hellion.org.uk>:Hans de Goede <hdegoede@redhat.com>
> Active arm armv7 sunxi - sunxi Cubieboard2_FEL sun7i:CUBIEBOARD2,SPL_FEL,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI Ian Campbell <ijc@hellion.org.uk>:Hans de Goede <hdegoede@redhat.com>
^ permalink raw reply [flat|nested] 5+ messages in thread* [U-Boot] [PATCH] sun7i: Add bananapi board
2014-07-29 18:57 ` Hannes Petermaier
@ 2014-07-29 19:00 ` Ian Campbell
2014-07-29 19:43 ` Hannes Petermaier
0 siblings, 1 reply; 5+ messages in thread
From: Ian Campbell @ 2014-07-29 19:00 UTC (permalink / raw)
To: u-boot
On Tue, 2014-07-29 at 20:57 +0200, Hannes Petermaier wrote:
> Hello Hans,
>
> i tried to test your patch, but unfortunately i cannot apply it to a
> freshly cloned u-boot:
It applies to the current u-boot-arm.git#master plus the set of changes
currently in u-boot-sunxi.git#master. In fact I would expect it to show
up in the latter pretty soon.
Ian.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH] sun7i: Add bananapi board
2014-07-29 19:00 ` Ian Campbell
@ 2014-07-29 19:43 ` Hannes Petermaier
0 siblings, 0 replies; 5+ messages in thread
From: Hannes Petermaier @ 2014-07-29 19:43 UTC (permalink / raw)
To: u-boot
Many thanks,
now the patch applies and i can compile u-boot.
maybe tomorrow i get the ordered board from pollin.de and can test this.
best regards,
hannes
On 2014-07-29 21:00, Ian Campbell wrote:
> On Tue, 2014-07-29 at 20:57 +0200, Hannes Petermaier wrote:
>> Hello Hans,
>>
>> i tried to test your patch, but unfortunately i cannot apply it to a get
>> freshly cloned u-boot:
> It applies to the current u-boot-arm.git#master plus the set of changes
> currently in u-boot-sunxi.git#master. In fact I would expect it to show
> up in the latter pretty soon.
>
> Ian.
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-07-29 19:43 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-07-29 16:57 [U-Boot] [PATCH] sun7i: Add bananapi board Hans de Goede
2014-07-29 17:39 ` Ian Campbell
2014-07-29 18:57 ` Hannes Petermaier
2014-07-29 19:00 ` Ian Campbell
2014-07-29 19:43 ` Hannes Petermaier
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox