[U-Boot] [PATCH v3 07/16] sandbox: dts: Add a serial console node

[Stephen Warren <swarren@wwwdotorg.org>]

On 08/01/2014 03:40 PM, Simon Glass wrote:
> Hi Stephen,
>
> On 1 August 2014 00:09, Stephen Warren <swarren@wwwdotorg.org> wrote:
>> On 07/31/2014 04:13 PM, Simon Glass wrote:
>>>
>>> Hi Stephen,
>>>
>>> On 31 July 2014 21:20, Stephen Warren <swarren@wwwdotorg.org> wrote:
>>>>
>>>> On 07/30/2014 03:49 AM, Simon Glass wrote:
>>>>>
>>>>>
>>>>> If the sandbox device tree is provided to U-Boot (with the -d flag) then it
>>>>> will use the device tree version in preference to the built-in device. The
>>>>> only difference is the colour.
>>>>
>>>>> diff --git a/arch/sandbox/dts/sandbox.dts b/arch/sandbox/dts/sandbox.dts
>>>>> +       uart0: serial {
>>>>> +               compatible = "sandbox,serial";
>>>>> +               u-boot,dm-pre-reloc;
>>>>
...
>>>>> +               text-colour = "cyan";
>>>>
>>>>
>>>>
>>>> That's property should likely have a uboot, prefix, since it's
>>>> non-standard.
>>>
>>> Can I not just declare a binding for 'sandbox,serial'?
>>
>> Properties that are relevant only to a particular binding, rather than being
>> something quite generic an applicable to a whole class of devices, typically
>> have a vendor prefix.
>>
>> A binding should/must exist for every node or compatible value. So, whether
>> you actually write the binding document or not makes no difference to the
>> names or vendor prefixes of the properties the binding uses.
>
> So here you are saying it should be:
>
>     sandbox,text-colour = "cyan";
>
> Is that right?

I think that sounds right yes.