From: Przemyslaw Marczak <p.marczak@samsung.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [U-boot] Origen board boot failed with 2014.07 source code
Date: Mon, 04 Aug 2014 12:03:45 +0200 [thread overview]
Message-ID: <53DF5A81.4080209@samsung.com> (raw)
In-Reply-To: <FE7ADED5C2218B4786C09CD97DC4C49F0114D7C3@exchbj02.viatech.com.bj>
Hello Tiger,
On 07/30/2014 01:44 PM, TigerLiu at via-alliance.com wrote:
> Hi, singh:
>
> I have an Origen(Cortex-A9 Dual Core, Exynos 4210) development
> board.(InSignal produced)
>
> I followed below steps to verify the latest u-boot release code:
>
> 1. build uboot
>
> make origen_config
>
> make all
>
>
>
> then it will origen-spl.bin in spl dir.
>
> 2. run "dd" command to burn raw images into a SD Card.
>
> dd iflag=dsync oflag=dsync if=./origen-spl.bin of=/dev/sdb bs=512
The first block of SD card is reserved for a partition table.
You missed seek=1 in above command - this should helps.
>
> dd iflag=dsync oflag=dsync if=./u-boot.bin of=/dev/sdb bs=512 seek=65
>
>
>
> but nothing appeared in a UART terminal.
>
>
>
> Best wishes,
>
>
>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
Best regards,
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com
prev parent reply other threads:[~2014-08-04 10:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-30 11:44 [U-Boot] [U-boot] Origen board boot failed with 2014.07 source code TigerLiu at via-alliance.com
2014-08-04 10:03 ` Przemyslaw Marczak [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53DF5A81.4080209@samsung.com \
--to=p.marczak@samsung.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox