[U-Boot] [PATCH 12/18] arm: mx6: add support for Compulab cm-fx6 CoM

[Nikita Kiryanov <nikita@compulab.co.il>]

On 03/08/14 17:09, Marek Vasut wrote:
> On Sunday, August 03, 2014 at 09:34:42 AM, Nikita Kiryanov wrote:
>> Add initial support for Compulab CM-FX6 CoM.
>> Support includes MMC, SPI flash, and SPL with dynamic DRAM detection.
>>
>> Cc: Igor Grinberg <grinberg@compulab.co.il>
>> Cc: Stefano Babic <sbabic@denx.de>
>> Cc: Tom Rini <trini@ti.com>
>> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
>> ---
>>   arch/arm/cpu/armv7/mx6/ddr.c       |   1 -
>>   board/compulab/cm_fx6/Makefile     |  12 ++
>>   board/compulab/cm_fx6/cm_fx6.c     | 108 ++++++++++
>>   board/compulab/cm_fx6/common.c     |  83 ++++++++
>>   board/compulab/cm_fx6/common.h     |  36 ++++
>>   board/compulab/cm_fx6/imximage.cfg |   8 +
>>   board/compulab/cm_fx6/spl.c        | 400
>> +++++++++++++++++++++++++++++++++++++ boards.cfg                         |
>>    2 +
>>   include/configs/cm_fx6.h           | 227 +++++++++++++++++++++
>>   9 files changed, 876 insertions(+), 1 deletion(-)
>>   create mode 100644 board/compulab/cm_fx6/Makefile
>>   create mode 100644 board/compulab/cm_fx6/cm_fx6.c
>>   create mode 100644 board/compulab/cm_fx6/common.c
>>   create mode 100644 board/compulab/cm_fx6/common.h
>>   create mode 100644 board/compulab/cm_fx6/imximage.cfg
>>   create mode 100644 board/compulab/cm_fx6/spl.c
>>   create mode 100644 include/configs/cm_fx6.h
>>
>> diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c
>> index d3891dc..219263a 100644
>> --- a/arch/arm/cpu/armv7/mx6/ddr.c
>> +++ b/arch/arm/cpu/armv7/mx6/ddr.c
>> @@ -4,7 +4,6 @@
>>    *
>>    * SPDX-License-Identifier:     GPL-2.0+
>>    */
>> -
>>   #include <common.h>
>>   #include <linux/types.h>
>>   #include <asm/arch/mx6-ddr.h>
>
> Drop this piece ;-)

Yep...

>
> [...]
>> +++ b/board/compulab/cm_fx6/cm_fx6.c
>
> [...]
>
>> +static ulong bank1_size;
>> +static ulong bank2_size;
>> +
>> +#define MMDC1_MDCTL 0x21B0000
>> +static int probe_mmdc_config(void)
>> +{
>> +	u32 val = readl(0x21B0000);
>> +	switch (val) {
>> +	case 0x83180000: /* DDR_16BIT_256MB */
>> +		gd->ram_size	= 0x10000000;
>> +		bank1_size	= 0x10000000;
>> +		bank2_size	= 0;
>> +		break;
>> +	case 0x83190000: /* DDR_32BIT_512MB */
>> +		gd->ram_size	= 0x20000000;
>> +		bank1_size	= 0x20000000;
>> +		bank2_size	= 0;
>> +		break;
>
> imx_ddr_size() won't cut it here ?

It doesn't handle 4GB correctly (returns 0). I suppose
I can make a patch which caps the return value of
imx_ddr_size() for MX6 socs to 3840MB.
What do you think?

>
> [...]
>