From mboxrd@z Thu Jan  1 00:00:00 1970
From: Hannes Petermaier <hannes@petermaier.org>
Date: Tue, 05 Aug 2014 14:22:16 +0200
Subject: [U-Boot] hw_watchdog
In-Reply-To: <53E0BADB.8010901@polkaspots.com>
References: <53E085BF.709@petermaier.org> <53E09BFA.1090401@petermaier.org>
	<53E0BADB.8010901@polkaspots.com>
Message-ID: <53E0CC78.5080500@petermaier.org>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 2014-08-05 13:07, andrew at PolkaSpots.com wrote:
> How can I find out if hw_watchdog is enabled on my U-Boot?
> Is there a timing variable that I need to set in "u-boot-env"
> Or that part of the code is executed earlier.
>
> Bassically what im experienceing is that sometimes, in some unknown 
> conditions, U-Boot will freeze, at the point when is relocating to 
> RAM. I belive.
> O dont get anything else after DRAM:  64 M.
>
> Kernel which I'm using is 3.10.
> Any advice will be very much appreciated.
>
> Thanks.
>
>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
Hi andrew,
on which plattform you are ?

best regards,
hannes