[U-Boot] [PATCH v3] powerpc/t104xrdb: Add T1042RDB board support

[York Sun <yorksun@freescale.com>]

On 07/31/2014 09:20 PM, Vijay Rai wrote:
> T1042RDB is a Freescale reference board that hosts the T1042 SoC
> (and variants). The board is similar to T1040RDB, T1042 is a reduced
> personality of T1040 SoC without Integrated 8-port Gigabit(L2 Switch).
> 
> T1042RDB is configured with serdes protocol 0x86 which can support
> following interfaces
> - 2 RGMII's on DTSEC4, DTSEC5
> - 1 SGMII on DTSEC3
> DTSEC1, DTSEC2 are not connected on board.
> 
> This Patch
> - add T1042RDB support
> - updates README file for T1042RDB details and update commands for switching
>   to alternate banks from vBank0 to vBank4 and vice versa
> 
> This patch also does minor clean ups for fdt defines for T1042RDB and
> T1042RDB_PI board
> 
> Signed-off-by: Vijay Rai <vijay.rai@freescale.com>
> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
> ---
>

Vijay,

I would like to ask you rebase this patch to u-boot-mpc85xx/master or
git://git.denx.de/u-boot.git/master.

There are some changes regarding Kconfig. This changes the way we add new
boards. I could do this for you for this patch but I think it will be a good
exercise for you to understand the change.

By the way, whenever you send a new version, it will be helpful to include a
change log under the ---, even there is no change. It will save reviewers effort
to find out the difference.

York