From: Kishon Vijay Abraham I <kishon@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [UBOOT RFC PATCH 07/13] usb: gadget: g_dnl: Explicitly set the max packet size in descriptor
Date: Tue, 19 Aug 2014 21:12:29 +0530 [thread overview]
Message-ID: <53F37065.7050602@ti.com> (raw)
In-Reply-To: <20140819153918.GK16085@saruman.home>
On Tuesday 19 August 2014 09:09 PM, Felipe Balbi wrote:
> Hi,
>
> On Tue, Aug 19, 2014 at 09:04:06PM +0530, Kishon Vijay Abraham I wrote:
>> On Monday 18 August 2014 08:08 PM, Felipe Balbi wrote:
>>> On Mon, Aug 18, 2014 at 07:58:29PM +0530, Kishon Vijay Abraham I wrote:
>>>> Explicity set the max packet size in the device descriptor to 0x40
>>>> as specified in the device class specification for device firmware upgrade.
>>>> Also changed debug to printf to explicitly notify the user if the
>>>> device has been enumerated.
>>>>
>>>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>>>> ---
>>>> drivers/usb/gadget/composite.c | 3 +--
>>>> drivers/usb/gadget/g_dnl.c | 1 +
>>>> 2 files changed, 2 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
>>>> index 7bd2562..60ca9a5 100644
>>>> --- a/drivers/usb/gadget/composite.c
>>>> +++ b/drivers/usb/gadget/composite.c
>>>> @@ -331,7 +331,7 @@ static int set_config(struct usb_composite_dev *cdev,
>>>> } else
>>>> result = 0;
>>>>
>>>> - debug("%s: %s speed config #%d: %s\n", __func__,
>>>> + printf("%s: %s speed config #%d: %s\n", __func__,
>>>
>>> this looks like it's only needed for debugging. No strong feelings
>>> though
>>
>> yeah.. it helps to know if the device has been enumerated.
>>>
>>>> @@ -987,7 +987,6 @@ static int composite_bind(struct usb_gadget *gadget)
>>>>
>>>> memcpy(&cdev->desc, composite->dev,
>>>> sizeof(struct usb_device_descriptor));
>>>> - cdev->desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
>>>
>>> why are you dropping this line ?
>>
>> Actually faced an issue with this. DWC3 gadget sets ep0 maxpacket size
>> to 512 and if the device is operating at hight speed, the
>> bMaxPacketSize0 field should be 64?
>
> right, but that's changed on connection done IRQ.
>
>> If the maxpacket size is set to 512, the host reports Invalid EP0
>> Maxpacket.
>
> huh ? who broke dwc3 ? connection done happens before we receive the
> first setup packet, how can host complain about anything ?
>
composite_bind() (where maxpacket is being set) happens much before connection
done interrupt. So it's not dwc3's fault.
Thanks
Kishon
next prev parent reply other threads:[~2014-08-19 15:42 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-18 14:28 [U-Boot] [UBOOT RFC PATCH 00/13] DRA7xx: Add DWC3 USB driver and enable DFU Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 01/13] include: linux: preparation for porting dwc3 from linux kernel Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 02/13] usb: gadget: udc-core: Add minimal udc-core " Kishon Vijay Abraham I
2014-08-18 14:36 ` Felipe Balbi
2014-08-19 14:58 ` Kishon Vijay Abraham I
2014-08-19 8:52 ` Lukasz Majewski
2014-08-19 15:11 ` Felipe Balbi
2014-08-19 15:18 ` Kishon Vijay Abraham I
2014-08-19 15:28 ` Felipe Balbi
2014-08-19 15:38 ` Lukasz Majewski
2014-08-19 16:06 ` Kishon Vijay Abraham I
2014-08-20 7:02 ` Lukasz Majewski
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 03/13] ARM: DRA7: Enable clocks for USB OTGSS and USB PHY Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 04/13] usb: dwc3: Add dwc3 driver Kishon Vijay Abraham I
2014-08-18 14:37 ` Felipe Balbi
2014-08-19 15:19 ` Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 05/13] usb: dwc3-omap: Add dwc3 glue driver for OMAP Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 06/13] usb: dwc3: TI PHY: PHY driver for dwc3 in TI platforms Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 07/13] usb: gadget: g_dnl: Explicitly set the max packet size in descriptor Kishon Vijay Abraham I
2014-08-18 14:38 ` Felipe Balbi
2014-08-18 14:49 ` Lukasz Majewski
2014-08-18 14:56 ` Lukasz Majewski
2014-08-19 15:38 ` Kishon Vijay Abraham I
2014-08-19 15:44 ` Felipe Balbi
2014-08-20 7:34 ` Lukasz Majewski
2014-08-20 16:11 ` Felipe Balbi
2014-08-21 8:00 ` Lukasz Majewski
2014-08-21 13:50 ` Felipe Balbi
2014-08-20 7:23 ` Lukasz Majewski
2014-08-19 15:34 ` Kishon Vijay Abraham I
2014-08-19 15:39 ` Felipe Balbi
2014-08-19 15:42 ` Kishon Vijay Abraham I [this message]
2014-08-19 15:48 ` Felipe Balbi
2014-08-19 15:53 ` Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 08/13] common: cmd_dfu: invoke board_usb_cleanup() for cleaning up Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 09/13] common: cmd_dfu: add an API that takes controller index for handling interrupts Kishon Vijay Abraham I
2014-08-19 8:53 ` Lukasz Majewski
2014-08-19 16:09 ` Kishon Vijay Abraham I
2014-08-20 7:37 ` Lukasz Majewski
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 10/13] board: ti: DRA7: added USB initializtion code Kishon Vijay Abraham I
2014-08-18 14:40 ` Felipe Balbi
2014-08-19 16:13 ` Kishon Vijay Abraham I
2014-08-19 16:26 ` Felipe Balbi
2014-08-22 10:47 ` Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 11/13] commom: usb: implement "__weak" functions to make compiler happy Kishon Vijay Abraham I
2014-08-19 8:28 ` Lukasz Majewski
2014-08-19 16:14 ` Kishon Vijay Abraham I
2014-08-21 17:32 ` Tom Rini
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 12/13] include: configs: Enable DWC3 and DFU in DRA7xx Kishon Vijay Abraham I
2014-08-18 14:28 ` [U-Boot] [UBOOT RFC PATCH 13/13] dwc3: core: Change the bounce buffer size to 4096 Kishon Vijay Abraham I
2014-08-18 14:41 ` Felipe Balbi
2014-08-19 16:15 ` Kishon Vijay Abraham I
2014-08-19 16:27 ` Felipe Balbi
2014-08-22 11:02 ` Kishon Vijay Abraham I
2014-08-22 13:54 ` Felipe Balbi
2014-08-18 15:29 ` [U-Boot] [UBOOT RFC PATCH 00/13] DRA7xx: Add DWC3 USB driver and enable DFU Tom Rini
2014-08-19 8:56 ` Lukasz Majewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53F37065.7050602@ti.com \
--to=kishon@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox