* [U-Boot] Recommended MIPS toolchain @ 2014-08-20 9:35 Vasili Galka 2014-08-20 10:23 ` Daniel Schwierzeck 0 siblings, 1 reply; 8+ messages in thread From: Vasili Galka @ 2014-08-20 9:35 UTC (permalink / raw) To: u-boot Hi, What is the recommended tool-chain to verify compilation of MIPS boards? I tried the one from https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.9.0/ But it does not work, throws plenty of errors about hard/soft float. Regards, Vasili ^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] Recommended MIPS toolchain 2014-08-20 9:35 [U-Boot] Recommended MIPS toolchain Vasili Galka @ 2014-08-20 10:23 ` Daniel Schwierzeck 2014-08-20 11:50 ` Vasili Galka 0 siblings, 1 reply; 8+ messages in thread From: Daniel Schwierzeck @ 2014-08-20 10:23 UTC (permalink / raw) To: u-boot On 20.08.2014 11:35, Vasili Galka wrote: > Hi, > > What is the recommended tool-chain to verify compilation of MIPS boards? you could try Denx ELDK 5.5 for MIPS http://www.denx.de/wiki/ELDK-5/WebHome or Mentor Sourcery CodeBench Lite Edition for MIPS ELF https://sourcery.mentor.com/GNUToolchain/subscription3537?lite=MIPS > > I tried the one from > https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.9.0/ > But it does not work, throws plenty of errors about hard/soft float. Similar to ARM you can use the built-in libgcc implementation of U-Boot with "export USE_PRIVATE_LIBGCC=yes" (before Kbuild/Kconfig) or "CONFIG_USE_PRIVATE_LIBGCC=y". Actually you would need a full multilib toolchain with different libgcc or multiple toolchains to build all BE/LE and hard-float/soft-float variants. But that is not feasible, so you should always set USE_PRIVATE_LIBGCC. USE_PRIVATE_LIBGCC is also required for ELDK toolchains. BTW: "MAKEALL -a mips" with the kernel.org toolchain and USE_PRIVATE_LIBGCC works -- - Daniel ^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] Recommended MIPS toolchain 2014-08-20 10:23 ` Daniel Schwierzeck @ 2014-08-20 11:50 ` Vasili Galka 2014-08-20 12:20 ` Daniel Schwierzeck 0 siblings, 1 reply; 8+ messages in thread From: Vasili Galka @ 2014-08-20 11:50 UTC (permalink / raw) To: u-boot Hi Daniel, On Wed, Aug 20, 2014 at 1:23 PM, Daniel Schwierzeck <daniel.schwierzeck@gmail.com> wrote: > > > > On 20.08.2014 11:35, Vasili Galka wrote: > > Hi, > > > > What is the recommended tool-chain to verify compilation of MIPS boards? > > you could try > > Denx ELDK 5.5 for MIPS > http://www.denx.de/wiki/ELDK-5/WebHome > > or > > Mentor Sourcery CodeBench Lite Edition for MIPS ELF > https://sourcery.mentor.com/GNUToolchain/subscription3537?lite=MIPS > > > > > I tried the one from > > https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.9.0/ > > But it does not work, throws plenty of errors about hard/soft float. > > Similar to ARM you can use the built-in libgcc implementation of U-Boot > with "export USE_PRIVATE_LIBGCC=yes" (before Kbuild/Kconfig) or > "CONFIG_USE_PRIVATE_LIBGCC=y". > > Actually you would need a full multilib toolchain with different libgcc > or multiple toolchains to build all BE/LE and hard-float/soft-float > variants. But that is not feasible, so you should always set > USE_PRIVATE_LIBGCC. USE_PRIVATE_LIBGCC is also required for ELDK toolchains. > > BTW: "MAKEALL -a mips" with the kernel.org toolchain and > USE_PRIVATE_LIBGCC works > > -- > - Daniel Strangely, I still fail to build. I'm trying on u-boot/master 6d1966e12 (dated Aug 1st 2014) Building with the following commands, on clean build directory: export BUILD_DIR=/home/lab/dev/u-boot/out/all_mips export USE_PRIVATE_LIBGCC=yes export CROSS_COMPILE=mips-linux- ./MAKEALL -a mips Here is what I get with the toolchain from kernel.org: Building qemu_mips board... text data bss dec hex filename 223063 8160 217752 448975 6d9cf /home/lab/dev/u-boot/out/all_mips/u-boot mips-linux-ld.bfd: Warning: u-boot uses -msoft-float (set by arch/mips/cpu/mips32/built-in.o), /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_lshrdi3.o) uses -mhard-float mips-linux-ld.bfd: Warning: u-boot uses -msoft-float (set by arch/mips/cpu/mips32/built-in.o), /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_ashldi3.o) uses -mhard-float Building qemu_mipsel board... make[1]: *** [u-boot] Error 1 make: *** [sub-make] Error 2 mips-linux-size: '/home/lab/dev/u-boot/out/all_mips/u-boot': No such file mips-linux-ld.bfd: /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_lshrdi3.o): compiled for a big endian system and target is little endian mips-linux-ld.bfd: /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_lshrdi3.o): endianness incompatible with that of the selected emulation mips-linux-ld.bfd: failed to merge target specific data of file /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_lshrdi3.o) mips-linux-ld.bfd: /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_ashldi3.o): compiled for a big endian system and target is little endian mips-linux-ld.bfd: /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_ashldi3.o): endianness incompatible with that of the selected emulation mips-linux-ld.bfd: failed to merge target specific data of file /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_ashldi3.o) make[1]: *** [u-boot] Error 1 make: *** [sub-make] Error 2 and here is what I get with Mentor Sourcery CodeBench Lite Edition: (Replacing to CROSS_COMPILE=mips-sde-elf-) Building qemu_mips board... arch/mips/cpu/mips32/start.o: error adding symbols: Bad value make[1]: *** [u-boot] Error 1 make: *** [sub-make] Error 2 mips-sde-elf-size: '/home/lab/dev/u-boot/out/all_mips/u-boot': No such file mips-sde-elf-ld: board/qemu-mips/lowlevel_init.o: warning: linking abicalls files with non-abicalls files mips-sde-elf-ld: arch/mips/cpu/mips32/cpu.o: warning: linking abicalls files with non-abicalls files /home/lab/dev/u-boot/common/cli_simple.c: In function 'process_macros': /home/lab/dev/u-boot/common/cli_simple.c:73:2: warning: format '%zd' expects argument of type 'signed size_t', but argument 2 has type '__kernel_size_t' [-Wformat=] debug_parser("[PROCESS_MACROS] INPUT len %zd: \"%s\"\n", strlen(input), ^ /home/lab/dev/u-boot/common/cli_simple.c:162:2: warning: format '%zd' expects argument of type 'signed size_t', but argument 2 has type '__kernel_size_t' [-Wformat=] debug_parser("[PROCESS_MACROS] OUTPUT len %zd: \"%s\"\n", ^ /home/lab/dev/u-boot/lib/lzma/LzmaTools.c: In function 'lzmaBuffToBuffDecompress': /home/lab/dev/u-boot/lib/lzma/LzmaTools.c:94:5: warning: format '%zx' expects argument of type 'size_t', but argument 2 has type 'SizeT' [-Wformat=] debug("LZMA: Uncompresed size............ 0x%zx\n", outSizeFull); ^ /home/lab/dev/u-boot/lib/lzma/LzmaTools.c:95:5: warning: format '%zx' expects argument of type 'size_t', but argument 2 has type 'SizeT' [-Wformat=] debug("LZMA: Compresed size.............. 0x%zx\n", compressedSize); ^ /home/lab/dev/u-boot/lib/lzma/LzmaTools.c:115:5: warning: format '%zx' expects argument of type 'size_t', but argument 2 has type 'SizeT' [-Wformat=] debug("LZMA: Uncompresed ................ 0x%zx\n", outProcessed); ^ /home/lab/dev/u-boot/common/cmd_nvedit.c: In function 'do_env_export': /home/lab/dev/u-boot/common/cmd_nvedit.c:914:3: warning: format '%zX' expects argument of type 'size_t', but argument 3 has type 'unsigned int' [-Wformat=] sprintf(buf, "%zX", (size_t)len); ^ /home/lab/dev/u-boot/common/cmd_nvedit.c: In function 'do_env_import': /home/lab/dev/u-boot/common/cmd_nvedit.c:1047:3: warning: format '%zu' expects argument of type 'size_t', but argument 2 has type 'unsigned int' [-Wformat=] printf("## Info: input data size = %zu = 0x%zX\n", size, size); ^ /home/lab/dev/u-boot/common/cmd_nvedit.c:1047:3: warning: format '%zX' expects argument of type 'size_t', but argument 3 has type 'unsigned int' [-Wformat=] /home/lab/dev/u-boot/lib/hashtable.c: In function 'hexport_r': /home/lab/dev/u-boot/lib/hashtable.c:605:2: warning: format '%zu' expects argument of type 'size_t', but argument 5 has type 'unsigned int' [-Wformat=] debug("EXPORT table = %p, htab.size = %d, htab.filled = %d, " ^ /home/lab/dev/u-boot/lib/hashtable.c:661:5: warning: format '%zu' expects argument of type 'size_t', but argument 2 has type 'unsigned int' [-Wformat=] "but need %zu\n", size, totlen + 1); ^ /home/lab/dev/u-boot/lib/hashtable.c:661:5: warning: format '%zu' expects argument of type 'size_t', but argument 3 has type 'unsigned int' [-Wformat=] /home/lab/dev/u-boot/lib/hashtable.c: In function 'himport_r': /home/lab/dev/u-boot/lib/hashtable.c:793:3: warning: format '%zu' expects argument of type 'size_t', but argument 2 has type 'unsigned int' [-Wformat=] debug("himport_r: can't malloc %zu bytes\n", size); ^ mips-sde-elf-ld: arch/mips/cpu/mips32/start.o: relocation R_MIPS_HI16 against `lowlevel_init' can not be used when making a shared object; recompile with -fPIC arch/mips/cpu/mips32/start.o: error adding symbols: Bad value make[1]: *** [u-boot] Error 1 make: *** [sub-make] Error 2 I would appreciate your assistance. Best, Vasili ^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] Recommended MIPS toolchain 2014-08-20 11:50 ` Vasili Galka @ 2014-08-20 12:20 ` Daniel Schwierzeck 2014-08-20 12:31 ` Vasili Galka 0 siblings, 1 reply; 8+ messages in thread From: Daniel Schwierzeck @ 2014-08-20 12:20 UTC (permalink / raw) To: u-boot On 20.08.2014 13:50, Vasili Galka wrote: > Hi Daniel, > > On Wed, Aug 20, 2014 at 1:23 PM, Daniel Schwierzeck > <daniel.schwierzeck@gmail.com> wrote: >> >> >> >> On 20.08.2014 11:35, Vasili Galka wrote: >>> Hi, >>> >>> What is the recommended tool-chain to verify compilation of MIPS boards? >> >> you could try >> >> Denx ELDK 5.5 for MIPS >> http://www.denx.de/wiki/ELDK-5/WebHome >> >> or >> >> Mentor Sourcery CodeBench Lite Edition for MIPS ELF >> https://sourcery.mentor.com/GNUToolchain/subscription3537?lite=MIPS >> >>> >>> I tried the one from >>> https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.9.0/ >>> But it does not work, throws plenty of errors about hard/soft float. >> >> Similar to ARM you can use the built-in libgcc implementation of U-Boot >> with "export USE_PRIVATE_LIBGCC=yes" (before Kbuild/Kconfig) or >> "CONFIG_USE_PRIVATE_LIBGCC=y". >> >> Actually you would need a full multilib toolchain with different libgcc >> or multiple toolchains to build all BE/LE and hard-float/soft-float >> variants. But that is not feasible, so you should always set >> USE_PRIVATE_LIBGCC. USE_PRIVATE_LIBGCC is also required for ELDK toolchains. >> >> BTW: "MAKEALL -a mips" with the kernel.org toolchain and >> USE_PRIVATE_LIBGCC works >> >> -- >> - Daniel > > Strangely, I still fail to build. > I'm trying on u-boot/master 6d1966e12 (dated Aug 1st 2014) > Building with the following commands, on clean build directory: > > export BUILD_DIR=/home/lab/dev/u-boot/out/all_mips > export USE_PRIVATE_LIBGCC=yes > export CROSS_COMPILE=mips-linux- > ./MAKEALL -a mips sorry if I was not accurate enough but with introduction of Kbuild "USE_PRIVATE_LIBGCC=yes" was changed to "CONFIG_USE_PRIVATE_LIBGCC=y". To support different U-Boot versions you should set both variants: export USE_PRIVATE_LIBGCC=yes export CONFIG_USE_PRIVATE_LIBGCC=y > > Here is what I get with the toolchain from kernel.org: > > Building qemu_mips board... > text data bss dec hex filename > 223063 8160 217752 448975 6d9cf > /home/lab/dev/u-boot/out/all_mips/u-boot > mips-linux-ld.bfd: Warning: u-boot uses -msoft-float (set by > arch/mips/cpu/mips32/built-in.o), > /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_lshrdi3.o) > uses -mhard-float > mips-linux-ld.bfd: Warning: u-boot uses -msoft-float (set by > arch/mips/cpu/mips32/built-in.o), > /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_ashldi3.o) > uses -mhard-float > Building qemu_mipsel board... > make[1]: *** [u-boot] Error 1 > make: *** [sub-make] Error 2 > mips-linux-size: '/home/lab/dev/u-boot/out/all_mips/u-boot': No such file > mips-linux-ld.bfd: > /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_lshrdi3.o): > compiled for a big endian system and target is little endian > mips-linux-ld.bfd: > /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_lshrdi3.o): > endianness incompatible with that of the selected emulation > mips-linux-ld.bfd: failed to merge target specific data of file > /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_lshrdi3.o) > mips-linux-ld.bfd: > /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_ashldi3.o): > compiled for a big endian system and target is little endian > mips-linux-ld.bfd: > /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_ashldi3.o): > endianness incompatible with that of the selected emulation > mips-linux-ld.bfd: failed to merge target specific data of file > /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_ashldi3.o) > make[1]: *** [u-boot] Error 1 > make: *** [sub-make] Error 2 > > > and here is what I get with Mentor Sourcery CodeBench Lite Edition: > (Replacing to CROSS_COMPILE=mips-sde-elf-) > > Building qemu_mips board... > arch/mips/cpu/mips32/start.o: error adding symbols: Bad value > make[1]: *** [u-boot] Error 1 > make: *** [sub-make] Error 2 > mips-sde-elf-size: '/home/lab/dev/u-boot/out/all_mips/u-boot': No such file > mips-sde-elf-ld: board/qemu-mips/lowlevel_init.o: warning: linking > abicalls files with non-abicalls files > mips-sde-elf-ld: arch/mips/cpu/mips32/cpu.o: warning: linking abicalls > files with non-abicalls files > /home/lab/dev/u-boot/common/cli_simple.c: In function 'process_macros': > /home/lab/dev/u-boot/common/cli_simple.c:73:2: warning: format '%zd' > expects argument of type 'signed size_t', but argument 2 has type > '__kernel_size_t' [-Wformat=] > debug_parser("[PROCESS_MACROS] INPUT len %zd: \"%s\"\n", strlen(input), > ^ > /home/lab/dev/u-boot/common/cli_simple.c:162:2: warning: format '%zd' > expects argument of type 'signed size_t', but argument 2 has type > '__kernel_size_t' [-Wformat=] > debug_parser("[PROCESS_MACROS] OUTPUT len %zd: \"%s\"\n", > ^ > /home/lab/dev/u-boot/lib/lzma/LzmaTools.c: In function > 'lzmaBuffToBuffDecompress': > /home/lab/dev/u-boot/lib/lzma/LzmaTools.c:94:5: warning: format '%zx' > expects argument of type 'size_t', but argument 2 has type 'SizeT' > [-Wformat=] > debug("LZMA: Uncompresed size............ 0x%zx\n", outSizeFull); > ^ > /home/lab/dev/u-boot/lib/lzma/LzmaTools.c:95:5: warning: format '%zx' > expects argument of type 'size_t', but argument 2 has type 'SizeT' > [-Wformat=] > debug("LZMA: Compresed size.............. 0x%zx\n", compressedSize); > ^ > /home/lab/dev/u-boot/lib/lzma/LzmaTools.c:115:5: warning: format '%zx' > expects argument of type 'size_t', but argument 2 has type 'SizeT' > [-Wformat=] > debug("LZMA: Uncompresed ................ 0x%zx\n", outProcessed); > ^ > /home/lab/dev/u-boot/common/cmd_nvedit.c: In function 'do_env_export': > /home/lab/dev/u-boot/common/cmd_nvedit.c:914:3: warning: format '%zX' > expects argument of type 'size_t', but argument 3 has type 'unsigned > int' [-Wformat=] > sprintf(buf, "%zX", (size_t)len); > ^ > /home/lab/dev/u-boot/common/cmd_nvedit.c: In function 'do_env_import': > /home/lab/dev/u-boot/common/cmd_nvedit.c:1047:3: warning: format '%zu' > expects argument of type 'size_t', but argument 2 has type 'unsigned > int' [-Wformat=] > printf("## Info: input data size = %zu = 0x%zX\n", size, size); > ^ > /home/lab/dev/u-boot/common/cmd_nvedit.c:1047:3: warning: format '%zX' > expects argument of type 'size_t', but argument 3 has type 'unsigned > int' [-Wformat=] > /home/lab/dev/u-boot/lib/hashtable.c: In function 'hexport_r': > /home/lab/dev/u-boot/lib/hashtable.c:605:2: warning: format '%zu' > expects argument of type 'size_t', but argument 5 has type 'unsigned > int' [-Wformat=] > debug("EXPORT table = %p, htab.size = %d, htab.filled = %d, " > ^ > /home/lab/dev/u-boot/lib/hashtable.c:661:5: warning: format '%zu' > expects argument of type 'size_t', but argument 2 has type 'unsigned > int' [-Wformat=] > "but need %zu\n", size, totlen + 1); > ^ > /home/lab/dev/u-boot/lib/hashtable.c:661:5: warning: format '%zu' > expects argument of type 'size_t', but argument 3 has type 'unsigned > int' [-Wformat=] > /home/lab/dev/u-boot/lib/hashtable.c: In function 'himport_r': > /home/lab/dev/u-boot/lib/hashtable.c:793:3: warning: format '%zu' > expects argument of type 'size_t', but argument 2 has type 'unsigned > int' [-Wformat=] > debug("himport_r: can't malloc %zu bytes\n", size); > ^ > mips-sde-elf-ld: arch/mips/cpu/mips32/start.o: relocation R_MIPS_HI16 > against `lowlevel_init' can not be used when making a shared object; > recompile with -fPIC > arch/mips/cpu/mips32/start.o: error adding symbols: Bad value > make[1]: *** [u-boot] Error 1 > make: *** [sub-make] Error 2 > > I would appreciate your assistance. > > Best, > Vasili > -- - Daniel ^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] Recommended MIPS toolchain 2014-08-20 12:20 ` Daniel Schwierzeck @ 2014-08-20 12:31 ` Vasili Galka 2014-09-08 9:29 ` Masahiro Yamada 0 siblings, 1 reply; 8+ messages in thread From: Vasili Galka @ 2014-08-20 12:31 UTC (permalink / raw) To: u-boot Hi Daniel, On Wed, Aug 20, 2014 at 3:20 PM, Daniel Schwierzeck <daniel.schwierzeck@gmail.com> wrote: > > > On 20.08.2014 13:50, Vasili Galka wrote: >> Hi Daniel, >> >> On Wed, Aug 20, 2014 at 1:23 PM, Daniel Schwierzeck >> <daniel.schwierzeck@gmail.com> wrote: >>> >>> >>> >>> On 20.08.2014 11:35, Vasili Galka wrote: >>>> Hi, >>>> >>>> What is the recommended tool-chain to verify compilation of MIPS boards? >>> >>> you could try >>> >>> Denx ELDK 5.5 for MIPS >>> http://www.denx.de/wiki/ELDK-5/WebHome >>> >>> or >>> >>> Mentor Sourcery CodeBench Lite Edition for MIPS ELF >>> https://sourcery.mentor.com/GNUToolchain/subscription3537?lite=MIPS >>> >>>> >>>> I tried the one from >>>> https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.9.0/ >>>> But it does not work, throws plenty of errors about hard/soft float. >>> >>> Similar to ARM you can use the built-in libgcc implementation of U-Boot >>> with "export USE_PRIVATE_LIBGCC=yes" (before Kbuild/Kconfig) or >>> "CONFIG_USE_PRIVATE_LIBGCC=y". >>> >>> Actually you would need a full multilib toolchain with different libgcc >>> or multiple toolchains to build all BE/LE and hard-float/soft-float >>> variants. But that is not feasible, so you should always set >>> USE_PRIVATE_LIBGCC. USE_PRIVATE_LIBGCC is also required for ELDK toolchains. >>> >>> BTW: "MAKEALL -a mips" with the kernel.org toolchain and >>> USE_PRIVATE_LIBGCC works >>> >>> -- >>> - Daniel >> >> Strangely, I still fail to build. >> I'm trying on u-boot/master 6d1966e12 (dated Aug 1st 2014) >> Building with the following commands, on clean build directory: >> >> export BUILD_DIR=/home/lab/dev/u-boot/out/all_mips >> export USE_PRIVATE_LIBGCC=yes >> export CROSS_COMPILE=mips-linux- >> ./MAKEALL -a mips > > sorry if I was not accurate enough but with introduction of Kbuild > "USE_PRIVATE_LIBGCC=yes" was changed to "CONFIG_USE_PRIVATE_LIBGCC=y". > To support different U-Boot versions you should set both variants: > > export USE_PRIVATE_LIBGCC=yes > export CONFIG_USE_PRIVATE_LIBGCC=y > > >> >> Here is what I get with the toolchain from kernel.org: >> >> Building qemu_mips board... >> text data bss dec hex filename >> 223063 8160 217752 448975 6d9cf >> /home/lab/dev/u-boot/out/all_mips/u-boot >> mips-linux-ld.bfd: Warning: u-boot uses -msoft-float (set by >> arch/mips/cpu/mips32/built-in.o), >> /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_lshrdi3.o) >> uses -mhard-float >> mips-linux-ld.bfd: Warning: u-boot uses -msoft-float (set by >> arch/mips/cpu/mips32/built-in.o), >> /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_ashldi3.o) >> uses -mhard-float >> Building qemu_mipsel board... >> make[1]: *** [u-boot] Error 1 >> make: *** [sub-make] Error 2 >> mips-linux-size: '/home/lab/dev/u-boot/out/all_mips/u-boot': No such file >> mips-linux-ld.bfd: >> /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_lshrdi3.o): >> compiled for a big endian system and target is little endian >> mips-linux-ld.bfd: >> /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_lshrdi3.o): >> endianness incompatible with that of the selected emulation >> mips-linux-ld.bfd: failed to merge target specific data of file >> /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_lshrdi3.o) >> mips-linux-ld.bfd: >> /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_ashldi3.o): >> compiled for a big endian system and target is little endian >> mips-linux-ld.bfd: >> /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_ashldi3.o): >> endianness incompatible with that of the selected emulation >> mips-linux-ld.bfd: failed to merge target specific data of file >> /usr/mips-linux/bin/../lib/gcc/mips-linux/4.9.0/libgcc.a(_ashldi3.o) >> make[1]: *** [u-boot] Error 1 >> make: *** [sub-make] Error 2 >> >> >> and here is what I get with Mentor Sourcery CodeBench Lite Edition: >> (Replacing to CROSS_COMPILE=mips-sde-elf-) >> >> Building qemu_mips board... >> arch/mips/cpu/mips32/start.o: error adding symbols: Bad value >> make[1]: *** [u-boot] Error 1 >> make: *** [sub-make] Error 2 >> mips-sde-elf-size: '/home/lab/dev/u-boot/out/all_mips/u-boot': No such file >> mips-sde-elf-ld: board/qemu-mips/lowlevel_init.o: warning: linking >> abicalls files with non-abicalls files >> mips-sde-elf-ld: arch/mips/cpu/mips32/cpu.o: warning: linking abicalls >> files with non-abicalls files >> /home/lab/dev/u-boot/common/cli_simple.c: In function 'process_macros': >> /home/lab/dev/u-boot/common/cli_simple.c:73:2: warning: format '%zd' >> expects argument of type 'signed size_t', but argument 2 has type >> '__kernel_size_t' [-Wformat=] >> debug_parser("[PROCESS_MACROS] INPUT len %zd: \"%s\"\n", strlen(input), >> ^ >> /home/lab/dev/u-boot/common/cli_simple.c:162:2: warning: format '%zd' >> expects argument of type 'signed size_t', but argument 2 has type >> '__kernel_size_t' [-Wformat=] >> debug_parser("[PROCESS_MACROS] OUTPUT len %zd: \"%s\"\n", >> ^ >> /home/lab/dev/u-boot/lib/lzma/LzmaTools.c: In function >> 'lzmaBuffToBuffDecompress': >> /home/lab/dev/u-boot/lib/lzma/LzmaTools.c:94:5: warning: format '%zx' >> expects argument of type 'size_t', but argument 2 has type 'SizeT' >> [-Wformat=] >> debug("LZMA: Uncompresed size............ 0x%zx\n", outSizeFull); >> ^ >> /home/lab/dev/u-boot/lib/lzma/LzmaTools.c:95:5: warning: format '%zx' >> expects argument of type 'size_t', but argument 2 has type 'SizeT' >> [-Wformat=] >> debug("LZMA: Compresed size.............. 0x%zx\n", compressedSize); >> ^ >> /home/lab/dev/u-boot/lib/lzma/LzmaTools.c:115:5: warning: format '%zx' >> expects argument of type 'size_t', but argument 2 has type 'SizeT' >> [-Wformat=] >> debug("LZMA: Uncompresed ................ 0x%zx\n", outProcessed); >> ^ >> /home/lab/dev/u-boot/common/cmd_nvedit.c: In function 'do_env_export': >> /home/lab/dev/u-boot/common/cmd_nvedit.c:914:3: warning: format '%zX' >> expects argument of type 'size_t', but argument 3 has type 'unsigned >> int' [-Wformat=] >> sprintf(buf, "%zX", (size_t)len); >> ^ >> /home/lab/dev/u-boot/common/cmd_nvedit.c: In function 'do_env_import': >> /home/lab/dev/u-boot/common/cmd_nvedit.c:1047:3: warning: format '%zu' >> expects argument of type 'size_t', but argument 2 has type 'unsigned >> int' [-Wformat=] >> printf("## Info: input data size = %zu = 0x%zX\n", size, size); >> ^ >> /home/lab/dev/u-boot/common/cmd_nvedit.c:1047:3: warning: format '%zX' >> expects argument of type 'size_t', but argument 3 has type 'unsigned >> int' [-Wformat=] >> /home/lab/dev/u-boot/lib/hashtable.c: In function 'hexport_r': >> /home/lab/dev/u-boot/lib/hashtable.c:605:2: warning: format '%zu' >> expects argument of type 'size_t', but argument 5 has type 'unsigned >> int' [-Wformat=] >> debug("EXPORT table = %p, htab.size = %d, htab.filled = %d, " >> ^ >> /home/lab/dev/u-boot/lib/hashtable.c:661:5: warning: format '%zu' >> expects argument of type 'size_t', but argument 2 has type 'unsigned >> int' [-Wformat=] >> "but need %zu\n", size, totlen + 1); >> ^ >> /home/lab/dev/u-boot/lib/hashtable.c:661:5: warning: format '%zu' >> expects argument of type 'size_t', but argument 3 has type 'unsigned >> int' [-Wformat=] >> /home/lab/dev/u-boot/lib/hashtable.c: In function 'himport_r': >> /home/lab/dev/u-boot/lib/hashtable.c:793:3: warning: format '%zu' >> expects argument of type 'size_t', but argument 2 has type 'unsigned >> int' [-Wformat=] >> debug("himport_r: can't malloc %zu bytes\n", size); >> ^ >> mips-sde-elf-ld: arch/mips/cpu/mips32/start.o: relocation R_MIPS_HI16 >> against `lowlevel_init' can not be used when making a shared object; >> recompile with -fPIC >> arch/mips/cpu/mips32/start.o: error adding symbols: Bad value >> make[1]: *** [u-boot] Error 1 >> make: *** [sub-make] Error 2 >> >> I would appreciate your assistance. >> >> Best, >> Vasili >> > > -- > - Daniel My sincere apologies. My mistake. Your explanation was fine - I just misread it. Anyway, I have just successfully built all the boards with the kernel.org tool-chain. Many thanks for the help! Best regards, Vasili ^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] Recommended MIPS toolchain 2014-08-20 12:31 ` Vasili Galka @ 2014-09-08 9:29 ` Masahiro Yamada 2014-09-08 9:40 ` Vasili Galka 2014-09-08 10:30 ` Daniel Schwierzeck 0 siblings, 2 replies; 8+ messages in thread From: Masahiro Yamada @ 2014-09-08 9:29 UTC (permalink / raw) To: u-boot Hi Daniel, Vasili, > > > > sorry if I was not accurate enough but with introduction of Kbuild > > "USE_PRIVATE_LIBGCC=yes" was changed to "CONFIG_USE_PRIVATE_LIBGCC=y". > > To support different U-Boot versions you should set both variants: > > > > export USE_PRIVATE_LIBGCC=yes > > export CONFIG_USE_PRIVATE_LIBGCC=y > > > > Shall I send a patch to enable CONFIG_USE_PRIVATE_LIBGCC ? Best Regards Masahiro Yamada ^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] Recommended MIPS toolchain 2014-09-08 9:29 ` Masahiro Yamada @ 2014-09-08 9:40 ` Vasili Galka 2014-09-08 10:30 ` Daniel Schwierzeck 1 sibling, 0 replies; 8+ messages in thread From: Vasili Galka @ 2014-09-08 9:40 UTC (permalink / raw) To: u-boot Hi Masahiro, On Mon, Sep 8, 2014 at 12:29 PM, Masahiro Yamada <yamada.m@jp.panasonic.com> wrote: > Hi Daniel, Vasili, > > > > > > > > sorry if I was not accurate enough but with introduction of Kbuild > > > "USE_PRIVATE_LIBGCC=yes" was changed to "CONFIG_USE_PRIVATE_LIBGCC=y". > > > To support different U-Boot versions you should set both variants: > > > > > > export USE_PRIVATE_LIBGCC=yes > > > export CONFIG_USE_PRIVATE_LIBGCC=y > > > > > > > > > Shall I send a patch to enable CONFIG_USE_PRIVATE_LIBGCC ? > > > Best Regards > Masahiro Yamada > > That probably depends on the percentage of toolchains that require this flag to be set. I only tried one and it does require it. I believe Daniel can provide more statistics. Regards, Vasili ^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] Recommended MIPS toolchain 2014-09-08 9:29 ` Masahiro Yamada 2014-09-08 9:40 ` Vasili Galka @ 2014-09-08 10:30 ` Daniel Schwierzeck 1 sibling, 0 replies; 8+ messages in thread From: Daniel Schwierzeck @ 2014-09-08 10:30 UTC (permalink / raw) To: u-boot Hi Masahiro, On 08.09.2014 11:29, Masahiro Yamada wrote: > Hi Daniel, Vasili, > > >>> >>> sorry if I was not accurate enough but with introduction of Kbuild >>> "USE_PRIVATE_LIBGCC=yes" was changed to "CONFIG_USE_PRIVATE_LIBGCC=y". >>> To support different U-Boot versions you should set both variants: >>> >>> export USE_PRIVATE_LIBGCC=yes >>> export CONFIG_USE_PRIVATE_LIBGCC=y >>> >>> > > > Shall I send a patch to enable CONFIG_USE_PRIVATE_LIBGCC ? > I'm not sure. That would change the behaviour of MIPS in relation to other architectures. I think we need a common solution for all architectures which always use a private libgcc like the kernel does. -- - Daniel ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2014-09-08 10:30 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-08-20 9:35 [U-Boot] Recommended MIPS toolchain Vasili Galka 2014-08-20 10:23 ` Daniel Schwierzeck 2014-08-20 11:50 ` Vasili Galka 2014-08-20 12:20 ` Daniel Schwierzeck 2014-08-20 12:31 ` Vasili Galka 2014-09-08 9:29 ` Masahiro Yamada 2014-09-08 9:40 ` Vasili Galka 2014-09-08 10:30 ` Daniel Schwierzeck
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox