From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Wed, 20 Aug 2014 12:59:14 +0200 Subject: [U-Boot] [PATCH 06/11] imx: ventana: add video enable gpio pinmux for GW54xx In-Reply-To: <1407476151-5603-7-git-send-email-tharvey@gateworks.com> References: <1407476151-5603-1-git-send-email-tharvey@gateworks.com> <1407476151-5603-7-git-send-email-tharvey@gateworks.com> Message-ID: <53F47F82.4020509@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 08/08/2014 07:35, Tim Harvey wrote: > Signed-off-by: Tim Harvey > --- > board/gateworks/gw_ventana/gw_ventana.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c > index 9857a05..07d5e2d 100644 > --- a/board/gateworks/gw_ventana/gw_ventana.c > +++ b/board/gateworks/gw_ventana/gw_ventana.c > @@ -643,6 +643,8 @@ static iomux_v3_cfg_t const gw54xx_gpio_pads[] = { > IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL)), > /* PCI_RST# */ > IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)), > + /* VID_EN */ > + IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)), > }; > > /* > Applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================