From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefano Babic Date: Wed, 20 Aug 2014 13:09:59 +0200 Subject: [U-Boot] [PATCH 05/11] imx: ventana: add econfig command In-Reply-To: <1407476151-5603-6-git-send-email-tharvey@gateworks.com> References: <1407476151-5603-1-git-send-email-tharvey@gateworks.com> <1407476151-5603-6-git-send-email-tharvey@gateworks.com> Message-ID: <53F48207.3080900@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Tim, On 08/08/2014 07:35, Tim Harvey wrote: > The Gateworks Ventana EEPROM contains a set of configuration bits that > affect the removal of device-tree nodes that support peripherals that do not > exist on sub-loaded boards. This patch adds: > - a structure to define a config bit name, dt node alias, bit position > - an array of supported configuration items > - an econfig command to get/set/list configuration bits > - use of the array when adjusting the FDT prior to boot > > Signed-off-by: Tim Harvey > --- After slight changes due to rebase on current u-boot-imx: Applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================