From mboxrd@z Thu Jan  1 00:00:00 1970
From: York Sun <yorksun@freescale.com>
Date: Wed, 20 Aug 2014 12:33:15 -0700
Subject: [U-Boot] [PATCH v2 2/2] powerpc/t1042RDB: Add Video - HDMI
	support
In-Reply-To: <1395197276-22725-2-git-send-email-dongsheng.wang@freescale.com>
References: <1395197276-22725-1-git-send-email-dongsheng.wang@freescale.com>
	<1395197276-22725-2-git-send-email-dongsheng.wang@freescale.com>
Message-ID: <53F4F7FB.8000306@freescale.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 03/18/2014 07:47 PM, Dongsheng Wang wrote:
> From: Jason Jin <Jason.Jin@freescale.com>
> 
> T1042 has internal display interface unit (DIU) for driving video.
> T1042RDB supports video mode via
> -LCD using TI enconder
> -HDMI type interface via HDMI encoder
> 
> Chrontel, CH7301C encoder which is I2C programmable is used
> as HDMI connector on T1042RDB.
> This patch add support to
> -enable Video interface for T1042RDB
> -route qixis multiplexing to enable DIU-HDMI interface on board
> -program DIU pixel clock gerenartor for T1042
> -program HDMI encoder via I2C on board
> 
> This patch refer to the upstream diu patch
> (337b0c52b3296f371d04aef71a833e09110e0e6b) for T1040qds.
> 
> Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
> Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
> ---
> V2:
> - Restore CONFIG_SYS_CONSOLE_IS_IN_ENV macors.
> - Restore CONFIG_SYS_MALLOC_LEN macors, this macors not effect FB.
> - Add a blank line between declarations and code.

Applied to u-boot-mpc85xx master branch, awaiting for upstream.

York